Hello vinayak, you connected data card to your PC or beagle itself?? because i can access Internet on my PC but when i follow the procedure you mentioned it did not work!!
i access internet on Ubuntu using WVDIAl package!! will appriciate any help. On Tuesday, November 5, 2013 1:53:17 AM UTC-5, Vinayak Aghor wrote: > > > Hi > I again tried with ubuntu OS on my PC & Connected USB 3G.. Verified i can > access internet. it is working fine.. as I am posting this on group > > I tried following on BBB > > I have attached picture > > For experts: kindly check that I could do that > > But somehow same steps did not work with windows vista on PC.. Thanks to > ubuntu > > On Friday, 25 October 2013 12:05:09 UTC+5:30, vinayak aghor wrote: >> >> Is there any one... who can help? >> >> >> >> On Sunday, 13 October 2013 13:51:27 UTC+5:30, vinayak aghor wrote: >>> >>> I did try following but I did nto get break through >>> >>> - /sbin/route add default gw 192.168.7.1 >>> - echo "nameserver 8.8.8.8" >> /etc/resolv.conf >>> >>> Please help >>> >>> >>> On Sunday, 13 October 2013 12:29:39 UTC+5:30, vinayak aghor wrote: >>>> >>>> >>>> Hello, >>>> I say share internet connection on 3G modem by following procedure >>>> properties --> sharing --> select the LAN connection .. then press ok >>>> >>>> Sharing is done. >>>> >>>> But , OS (Vista) assigns that LAN connection a IP : 192.168.0.1 & net >>>> mask as : 255.255.255.0 >>>> >>>> This is not in range of 192.168.7.2 of BBB. >>>> >>>> Because of this my connection between BBB & PC breaks. So I can not >>>> SSH into BBB. >>>> >>>> Regards, >>>> Vinayak >>>> >>>> >>>> >>>> >>>> On Sunday, 13 October 2013 11:29:32 UTC+5:30, Wulf Man wrote: >>>>> >>>>> enable internet connection sharing on your windows machine >>>>> >>>>> >>>>> On 10/12/2013 10:13 PM, vinayak aghor wrote: >>>>> > Hello, >>>>> > I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle >>>>> > bone black to laptop then I wan to access internet connetion of >>>>> laptop >>>>> > to with BBB. >>>>> > Currently following is status >>>>> > >>>>> ------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> > root@beaglebone:~# ping www.google.com >>>>> > ping: unknown host www.google.com >>>>> > >>>>> > root@beaglebone:~# ifconfig >>>>> > eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 >>>>> > UP BROADCAST MULTICAST MTU:1500 Metric:1 >>>>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>>> > collisions:0 txqueuelen:1000 >>>>> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>> > Interrupt:56 >>>>> > >>>>> > lo Link encap:Local Loopback >>>>> > inet addr:127.0.0.1 Mask:255.0.0.0 >>>>> > inet6 addr: ::1/128 Scope:Host >>>>> > UP LOOPBACK RUNNING MTU:65536 Metric:1 >>>>> > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 >>>>> > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 >>>>> > collisions:0 txqueuelen:0 >>>>> > RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) >>>>> > >>>>> > usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 >>>>> > inet addr:192.168.7.2 Bcast:192.168.7.3 >>>>> Mask:255.255.255.252 >>>>> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>>> > RX packets:479 errors:0 dropped:0 overruns:0 frame:0 >>>>> > TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 >>>>> > collisions:0 txqueuelen:1000 >>>>> > RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) >>>>> > >>>>> > >>>>> --------------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> > >>>>> > root@beaglebone:~# ping -i 0.5 192.168.7.1 >>>>> > PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. >>>>> > 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms >>>>> > 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms >>>>> > 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms >>>>> > 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms >>>>> > ^C >>>>> > --- 192.168.7.1 ping statistics --- >>>>> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >>>>> > rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms >>>>> > >>>>> -------------------------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> > >>>>> > root@beaglebone:~# ping -i 0.5 192.168.7.2 >>>>> > PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. >>>>> > 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms >>>>> > 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms >>>>> > 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms >>>>> > 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 time=0.117 ms >>>>> > ^C >>>>> > --- 192.168.7.2 ping statistics --- >>>>> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >>>>> > rtt min/avg/max/mdev = 0.117/0.158/0.235/0.048 ms >>>>> > root@beaglebone:~# >>>>> > >>>>> > I can SSH into BBB & can ping to & fro with PC. But as shown on TOP, >>>>> I >>>>> > can not ping to www.google.com >>>>> > >>>>> > Please help me >>>>> > >>>>> > Regards, >>>>> > Vinayak >>>>> > >>>>> > >>>>> > >>>>> > -- >>>>> > For more options, visit http://beagleboard.org/discuss >>>>> > --- >>>>> > You received this message because you are subscribed to the Google >>>>> > Groups "BeagleBoard" group. >>>>> > To unsubscribe from this group and stop receiving emails from it, >>>>> send >>>>> > an email to beagleboard...@googlegroups.com. >>>>> > For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
