Daniel I'm experiencing the same problem with the miniUSB and ADB - works on TI prebuilt; doesn't work on Andrew's 3.8 image. Have you had any luck figuring out a solution. I've Googled a lot and haven't seen anyone else report the issue. - Andy
On Friday, February 28, 2014 7:28:09 PM UTC-5, Daniel Delgado Terán wrote: > > I'm currently having a lot of problems here. If I use Andrew's pre-built > image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no > support to miniUSB+ADB, the device is not even recognized as an actual > device when I connect it (not even with a missing driver, it's just a ghost > device when connected). > > If I use the TI pre-build image is just the opposite. I get support to ADB > but I can't see anything on the LCD3 Rev. A2 screen. I have Linux only on a > Virtual Machine so compiling an new image is a bit difficult here. I tried > adding some parameters to uEnv.txt but nothing worked. Not to mention the > FTDI cable that is not showing anything, and became useless since I booted > Android. > > I also have a big question: OTG support is gone with this pre-built > images? I can't read any memory stick or to use a USB Bixolon printer. It's > possible to connect a USB fingerprint reader, Smart Card reader, RFID Card > reader or Camera as input? Another thing how about configuring the GPIO of > the BBB to use a keypad? > > Thanks in advance. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
