Possibly, depending on what you did. Try starting over and do a basic configuration, only the board and display and see how far you gt.
Gerald On Mon, Apr 7, 2014 at 4:27 PM, <nashid.muja...@gmail.com> wrote: > Yes you're correct, but I used this port as well due to attempting to > figure out why my wireless dongle for keybrd and mouse wasn't working any > longer when it was connected to USB Host connection. When the dongle didn't > work on USB host I then connected it to the USB hub getting the same > result. This is when I attempted connecting the USB client connection to > the hub and the Hub to the USB Host connect resulting in the arching > effect. My thought is it broke my board. > > > On Monday, April 7, 2014 4:16:11 PM UTC-5, Gerald wrote: > >> The micro USB port is not for a hub. It is for a PC. Maybe you might >> want to take a look at the manual. >> >> http://www.elinux.org/Beagleboard:BeagleBoneBlack >> >> >> Gerald >> >> >> >> On Mon, Apr 7, 2014 at 4:06 PM, A M Kent <anthon...@gmail.com> wrote: >> >>> I've recently purchased the BBB and over the weekend I went through >>> setting it up. I have to say I'm thoroughly impressed with the setup and >>> the size. I followed the supplied instructions of connecting the device to >>> my computer using the USB cable connecting it from the micro USB port to a >>> port on my laptop, installing the necessary files to communicate with the >>> device. My >>> issue occurred when I connected the BB in the following manner. >>> >>> 1. From micro HDMI port to HDMI port on monitor. >>> 2. Connected the 5V power source into the BB >>> 3. Connected a USB cable from the USB jack on the BB to my 4 port powered >>> USB hub. >>> 4. Connected the micro USB cable into the 4 port hub. >>> 5. Inserted wireless keybrd/mouse dongle into the 4 port hub. >>> >>> When I applied power to the BB within 1 minute of doing so I hear a >>> faint high pitch tone and shortly thereafter I see a spark coming from the >>> board. Based on the setup described what could have gone wrong? >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard...@googlegroups.com. >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
