Update of previous post: I'm currently running BBB Linux CNC image based on Debian Wheezy 7.3 on SDCard. I had to upgrade kernel to "Linux arm 3.14.0-rc8-bone0 #1 SMP Sat Mar 29 00:25:15 UTC 2014 armv7l GNU/Linux" from package Debian because of compiled in support for DS3232 RTC clock. I can see hot plug is running correctly. I can plug/unplug mouse and keyboard any time. Cold plug after reboot works as well. HDMI display is working too. Even Velleman 7-port HUB works too - which was not working on Angstrom at all.
Note: I originally built Angstrom image 12/2013 (becuase I need module mentioned above). But because I was not able get it booting from SDCard I moved to my working Debian. Seems there is even older 3.2.28 Kernel than I had before 3.8.13. - Tomas 2014-04-06 14:49 GMT+02:00 <hobbes4...@gmail.com>: > Hi, > > I have been following this USB thread for a while and wanted to add my 2 > cents. I have a related but "opposite" problem. My hot plug works but my > cold plugs does not. Let me clarify. > > *What works:* > > 1) Boot the Beagle Bone Black (the "BBB") with now USB pluged in > 2) Plug in a powered USB hub > 3) Everything works as expected > 4) Unplug usb > 5) Plug USB back in. Everything works as expected. So hot plug works. > > *What fails* > > 1) Power up the BBB with the powered USB connected. The USB hub come up > alot faster than the BBB. > 2) No matter what is done, there is no way to get the BBB to see the USB > devices apart from following up a reboot / power cycle as stated above. > > *Comments:* > > OS: Richard Nelson's Linux version 3.8.13-bone30 > (root@imx6q-sabrelite-1gb-1) (gcc version > 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #1 SMP Thu Nov 14 06:23:24 UTC 2013 > > Hardware: BBB Rev B. Only started shipping from March 2014 onwards. I > noticed a capacitor discrete mounted near the USB port. Is this a Rev B > hack? > > *What I am trying to solve* > > I would like to have the USB devices come online upon power up without > having to observe the (1) BBB on first (2) plug in the USB Hub + devices > sequence. I.E. if I stick all this stuff into an embedded gadget it would > not come up on power up. I would have to have some sort of two-phase relay > hardware in place to (1) power up the BBB first, then (2) the USB + USB > devices / dongles. > > Any thoughts / solutions? > > Best, Mike > > *Some cut-and-paste info* > > buntu@woofieone:~$ lsusb > Bus 001 Device 007: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB > Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth > Dongle (HCI mode) > Bus 001 Device 008: ID 154b:004f PNY > Bus 001 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Here is a USB GREP > > ubuntu@woofieone:~$ dmesg | egrep usb > [ 0.135150] usbcore: registered new interface driver usbfs > [ 0.135217] usbcore: registered new interface driver hub > [ 0.135457] usbcore: registered new device driver usb > [ 1.464285] usbcore: registered new interface driver cdc_ether > [ 1.479302] usbcore: registered new interface driver rndis_host > [ 1.503131] usbcore: registered new interface driver cdc_ncm > [ 1.523280] usbcore: registered new interface driver cdc_acm > [ 1.567758] usbcore: registered new interface driver usb-storage > [ 1.621644] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) > [ 1.628255] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 > [ 1.633507] musb-hdrc musb-hdrc.0.auto: > drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK > [ 1.656309] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk > combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) > [ 1.656326] musb-hdrc: MHDRC RTL version 2.0 > [ 1.656335] musb-hdrc: setup fifo_mode 4 > [ 1.656351] musb-hdrc: 28/31 max ep, 16384/16384 memory > [ 1.656456] musb-hdrc musb-hdrc.0.auto: *** mode=3 > [ 1.661525] musb-hdrc musb-hdrc.0.auto: *** power=250 > [ 1.692769] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 > [ 1.698031] musb-hdrc musb-hdrc.1.auto: > drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK > [ 1.715656] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk > combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) > [ 1.715668] musb-hdrc: MHDRC RTL version 2.0 > [ 1.715677] musb-hdrc: setup fifo_mode 4 > [ 1.715689] musb-hdrc: 28/31 max ep, 16384/16384 memory > [ 1.715786] musb-hdrc musb-hdrc.1.auto: *** mode=1 > [ 1.720837] musb-hdrc musb-hdrc.1.auto: *** power=250 > [ 1.726151] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver > [ 1.758390] musb-hdrc musb-hdrc.1.auto: new USB bus registered, > assigned bus number 1 > [ 1.766666] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup > [ 1.766748] usb usb1: default language 0x0409 > [ 1.766783] usb usb1: udev 1, busnum 1, minor = 0 > [ 1.766796] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 1.773951] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.781539] usb usb1: Product: MUSB HDRC host driver > [ 1.786761] usb usb1: Manufacturer: Linux 3.8.13-bone30 musb-hcd > [ 1.793073] usb usb1: SerialNumber: musb-hdrc.1.auto > [ 1.825146] usb usb1: usb_probe_device > [ 1.825166] usb usb1: configuration #1 chosen from 1 choice > [ 1.825217] usb usb1: adding 1-0:1.0 (config #1, interface 0) > [ 1.825330] hub 1-0:1.0: usb_probe_interface > [ 1.825343] hub 1-0:1.0: usb_probe_interface - got id > [ 1.934524] usb usb1: bus auto-suspend, wakeup 1 > [ 2.116993] usbcore: registered new interface driver usbhid > [ 2.122933] usbhid: USB HID core driver > [ 5.561628] usbcore: registered new interface driver rtl8192cu > [ 23.760104] usb usb1: usb wakeup-resume > [ 23.760150] usb usb1: usb auto-resume > [ 23.969260] usb 1-1: new high-speed USB device number 2 using musb-hdrc > [ 24.088645] usb 1-1: default language 0x0409 > [ 24.088715] usb 1-1: udev 2, busnum 1, minor = 1 > [ 24.088730] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 > [ 24.088742] usb 1-1: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 24.088753] usb 1-1: Product: USB 2.0 Hub > [ 24.090507] usb 1-1: usb_probe_device > [ 24.090535] usb 1-1: configuration #1 chosen from 1 choice > [ 24.092498] usb 1-1: adding 1-1:1.0 (config #1, interface 0) > [ 24.092724] hub 1-1:1.0: usb_probe_interface > [ 24.092741] hub 1-1:1.0: usb_probe_interface - got id > [ 24.363806] usb 1-1.3: new full-speed USB device number 3 using > musb-hdrc > [ 24.459263] usb 1-1.3: default language 0x0409 > [ 24.461214] usb 1-1.3: udev 3, busnum 1, minor = 2 > [ 24.461232] usb 1-1.3: New USB device found, idVendor=0a12, > idProduct=0001 > [ 24.461245] usb 1-1.3: New USB device strings: Mfr=0, Product=2, > SerialNumber=0 > [ 24.461256] usb 1-1.3: Product: CSR8510 A10 > [ 24.461819] usb 1-1.3: usb_probe_device > [ 24.461839] usb 1-1.3: configuration #1 chosen from 1 choice > [ 24.462756] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) > [ 24.463213] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) > [ 24.519918] btusb 1-1.3:1.0: usb_probe_interface > [ 24.519949] btusb 1-1.3:1.0: usb_probe_interface - got id > [ 24.529170] usbcore: registered new interface driver btusb > [ 24.533029] usb 1-1.4: new high-speed USB device number 4 using > musb-hdrc > [ 24.612124] usb 1-1.4: default language 0x0409 > [ 24.612211] usb 1-1.4: udev 4, busnum 1, minor = 3 > [ 24.612227] usb 1-1.4: New USB device found, idVendor=1a40, > idProduct=0101 > [ 24.612240] usb 1-1.4: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 24.612251] usb 1-1.4: Product: USB 2.0 Hub > [ 24.612741] usb 1-1.4: usb_probe_device > [ 24.612762] usb 1-1.4: configuration #1 chosen from 1 choice > [ 24.612904] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) > [ 24.613060] hub 1-1.4:1.0: usb_probe_interface > [ 24.613074] hub 1-1.4:1.0: usb_probe_interface - got id > [ 24.717887] usb 1-1.4: usb auto-suspend, wakeup 1 > [ 58.956081] usb 1-1: USB disconnect, device number 2 > [ 58.956095] usb 1-1.3: USB disconnect, device number 3 > [ 58.956106] usb 1-1.3: unregistering device > [ 58.956119] usb 1-1.3: unregistering interface 1-1.3:1.0 > [ 58.956467] musb-hdrc musb-hdrc.1.auto: shutdown urb de1c4bc0 ep1in-intr > [ 58.956491] musb-hdrc musb-hdrc.1.auto: shutdown urb de329f40 ep2in-bulk > [ 58.956508] musb-hdrc musb-hdrc.1.auto: shutdown urb de329e40 ep2in-bulk > [ 58.966138] usb 1-1.3: unregistering interface 1-1.3:1.1 > [ 58.966430] usb 1-1.3: usb_disable_device nuking all URBs > [ 58.966915] usb 1-1.4: USB disconnect, device number 4 > [ 58.966930] usb 1-1.4: unregistering device > [ 58.966942] usb 1-1.4: unregistering interface 1-1.4:1.0 > [ 58.967341] usb 1-1.4: usb_disable_device nuking all URBs > [ 58.969200] usb 1-1: unregistering device > [ 58.969222] usb 1-1: unregistering interface 1-1:1.0 > [ 58.969414] musb-hdrc musb-hdrc.1.auto: shutdown urb de1c46c0 ep1in-intr > [ 58.973932] usb 1-1: usb_disable_device nuking all URBs > [ 59.083145] usb usb1: bus auto-suspend, wakeup 1 > [ 67.196410] usb usb1: usb wakeup-resume > [ 67.196457] usb usb1: usb auto-resume > [ 67.405253] usb 1-1: new high-speed USB device number 5 using musb-hdrc > [ 67.524620] usb 1-1: default language 0x0409 > [ 67.524688] usb 1-1: udev 5, busnum 1, minor = 4 > [ 67.524702] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 > [ 67.524715] usb 1-1: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 67.524726] usb 1-1: Product: USB 2.0 Hub > [ 67.526497] usb 1-1: usb_probe_device > [ 67.526525] usb 1-1: configuration #1 chosen from 1 choice > [ 67.528467] usb 1-1: adding 1-1:1.0 (config #1, interface 0) > [ 67.528691] hub 1-1:1.0: usb_probe_interface > [ 67.528708] hub 1-1:1.0: usb_probe_interface - got id > [ 67.799792] usb 1-1.3: new full-speed USB device number 6 using > musb-hdrc > [ 67.895269] usb 1-1.3: default language 0x0409 > [ 67.897204] usb 1-1.3: udev 6, busnum 1, minor = 5 > [ 67.897222] usb 1-1.3: New USB device found, idVendor=0a12, > idProduct=0001 > [ 67.897235] usb 1-1.3: New USB device strings: Mfr=0, Product=2, > SerialNumber=0 > [ 67.897246] usb 1-1.3: Product: CSR8510 A10 > [ 67.897799] usb 1-1.3: usb_probe_device > [ 67.897820] usb 1-1.3: configuration #1 chosen from 1 choice > [ 67.898711] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) > [ 67.898948] btusb 1-1.3:1.0: usb_probe_interface > [ 67.898965] btusb 1-1.3:1.0: usb_probe_interface - got id > [ 67.902207] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) > [ 67.969786] usb 1-1.4: new high-speed USB device number 7 using > musb-hdrc > [ 68.050043] usb 1-1.4: default language 0x0409 > [ 68.050111] usb 1-1.4: udev 7, busnum 1, minor = 6 > [ 68.050125] usb 1-1.4: New USB device found, idVendor=1a40, > idProduct=0101 > [ 68.050138] usb 1-1.4: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 68.050149] usb 1-1.4: Product: USB 2.0 Hub > [ 68.050658] usb 1-1.4: usb_probe_device > [ 68.050679] usb 1-1.4: configuration #1 chosen from 1 choice > [ 68.050816] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) > [ 68.050956] hub 1-1.4:1.0: usb_probe_interface > [ 68.050970] hub 1-1.4:1.0: usb_probe_interface - got id > [ 68.155761] usb 1-1.4: usb auto-suspend, wakeup 1 > [ 280.645675] usb 1-1.1: new high-speed USB device number 8 using > musb-hdrc > [ 280.857913] usb 1-1.1: default language 0x0409 > [ 280.859216] usb 1-1.1: udev 8, busnum 1, minor = 7 > [ 280.859265] usb 1-1.1: New USB device found, idVendor=154b, > idProduct=004f > [ 280.859305] usb 1-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 280.859340] usb 1-1.1: Product: USB 2.0 FD > [ 280.859373] usb 1-1.1: Manufacturer: PNY Tech > [ 280.859405] usb 1-1.1: SerialNumber: 055811050105115493000298 > [ 280.864561] usb 1-1.1: usb_probe_device > [ 280.864628] usb 1-1.1: configuration #1 chosen from 1 choice > [ 280.868047] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) > [ 280.868795] usb-storage 1-1.1:1.0: usb_probe_interface > [ 280.868877] usb-storage 1-1.1:1.0: usb_probe_interface - got id > [ 280.872671] scsi0 : usb-storage 1-1.1:1.0 > > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/L_znK2sUAJo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
