Follow the instructions found here. http://www.elinux.org/Beagleboard:BeagleBoneBlack#Software_Resources
Gerald On Tue, Apr 8, 2014 at 10:51 PM, Terrence Li <tl159...@gmail.com> wrote: > Hi, > > I am new to the beaglebone black and I accidentally wrote an image on the > bbb itself using the win32disk imager. I understand that it affected the > eMMC of the board, but I have tried flashing the image to the board using > the stock image on a microSD. However, the board's led would flash for a > while then only lights D2 and D3 would light up. I am guessing that the > writing didn't work. Please help! > > Thanks > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.