Besides, the app is starting well as if I try with > > ssh -C -X root:root@192..... /home/Qt_app/myApp
the app is shown in the local display 2014-04-11 16:46 GMT+02:00 David Lewin <dlewin...@gmail.com>: > From your capture, it seems that you use a "traditional" display, so you > are able to use the local lxde terminal. > While I use ssh session (I can't use the 4" display to type directly in) > to connect to the board and run the app there.... > > > 2014-04-11 1:20 GMT+02:00 Hussam Hertani <halhe...@gmail.com>: > > David, here's a pic of the same app running in LXDE based on the >> latest official Debian image that I downloaded from: >> http://beagleboard.org/latest-images >> >> Make sure that you use a 4GB+ microsd. After burning the image onto >> the microsd, make sure you expand the root filesystem....you will need >> the space. >> >> Hussam >> >> >> >> >> >> On 4/10/14, Hussam Hertani <halhe...@gmail.com> wrote: >> > David, >> > If you are running an image with a Debian root filesystem this should >> work >> > no problems. I don't think that the QT4 built in the Debian apt-get >> armhf >> > repos was built with the -qws and -linuxfb options. As such it should >> only >> > work with X11. But I could be wrong as I can't quite confirm it. >> > >> > I use the demo image available here.. >> http://elinux.org/BeagleBoardDebian. I >> > always used it...never really bothered with angstrom even with the older >> > Beaglebone white. This image is headless and somewhat barebones. I also >> > really like the new official Debian release >> > http://beagleboard.org/latest-images. It comes with LXDE which is a >> very >> > good desktop environment for the BBB..... and........NodeJs......yuck! >> > >> > >> > On Thu, Apr 10, 2014 at 12:29 PM, David Lewin <dlewin...@gmail.com> >> wrote: >> > >> >> That a good example. >> >> I've tried with the provided executable and build it myself also from >> the >> >> board : >> >> both gave the same results, even with ssh+X >> >> BUT, what I see is that you use a different image as me: I ve used the >> >> git >> >> repo and did a: >> >> >> >> beagleboard.org_image.sh http://beagleboard.org/source >> >> >> >> >> >> to use the setup_sdcard.sh as explained. >> >> >> >> Maybe this is the problem root cause >> >> >> >> >> >> 2014-04-10 18:00 GMT+02:00 Hussam Hertani <halhe...@gmail.com>: >> >> >> >> David I'm currently running a headless setup on my BBB...I have xorg >> and >> >>> libqt4-dev packages installed (qt-sdk package encompasses libqt4-dev, >> >>> qtcreator and some additional packages) >> >>> >> >>> - I SSHed into the BBB with X11 Forwarding: ssh -X >> >>> debian@192.168.0.102 >> >>> - Made a directory containing a sample application >> >>> - built it using "qmake -project", "qmake" & "make" >> >>> - and ran the binary successfully! >> >>> >> >>> This seems to work with SSH+X11 forwarding....I will try it with the >> >>> latest Debian image +LXDE+Nodejs from >> >>> http://beagleboard.org/latest-images here and report back. >> >>> >> >>> I'm attaching a compressed folder containing the example code and a >> pic >> >>> of the GUI UI as displayed over SSH+X11. I'm running Debian Jessie on >> my >> >>> PC >> >>> and the latest Debian demo-image (headless) >> >>> http://elinux.org/BeagleBoardDebian on my BBB. >> >>> >> >>> >> >>> Hussam >> >>> >> >>> >> >>> >> >>> On Thu, Apr 10, 2014 at 9:21 AM, <halhe...@gmail.com> wrote: >> >>> >> >>>> >> >>>> David, >> >>>> Put "export DISPLAY=:0.0" in the /etc/profile, reboot and start X11 >> >>>> i.e >> >>>> lightdm/or LXDE. then try running the qt app binary again. I will >> retry >> >>>> this again myself and report back. >> >>>> >> >>>> Hussam >> >>>> >> >>>> >> >>>> On Tuesday, April 8, 2014 11:26:34 AM UTC-4, dlewin555 wrote: >> >>>>> >> >>>>> Hi, >> >>>>> >> >>>>> Is there finally someone who succeeded to have a GUI compiled with >> Qt >> >>>>> (from Debian for example ) ? >> >>>>> >> >>>>> I've tested many things, and they either rely on Angstrom (which I'd >> >>>>> like to avoid) or don't work at all (Timesys included) >> >>>>> >> >>>>> So I'm looking for a successful try ... >> >>>>> >> >>>> -- >> >>>> For more options, visit http://beagleboard.org/discuss >> >>>> --- >> >>>> You received this message because you are subscribed to a topic in >> the >> >>>> Google Groups "BeagleBoard" group. >> >>>> To unsubscribe from this topic, visit >> >>>> >> https://groups.google.com/d/topic/beagleboard/p9423s6B4lg/unsubscribe. >> >>>> To unsubscribe from this group and all its topics, send an email to >> >>>> beagleboard+unsubscr...@googlegroups.com. >> >>>> For more options, visit https://groups.google.com/d/optout. >> >>>> >> >>> >> >>> -- >> >>> For more options, visit http://beagleboard.org/discuss >> >>> --- >> >>> You received this message because you are subscribed to a topic in the >> >>> Google Groups "BeagleBoard" group. >> >>> To unsubscribe from this topic, visit >> >>> https://groups.google.com/d/topic/beagleboard/p9423s6B4lg/unsubscribe >> . >> >>> To unsubscribe from this group and all its topics, send an email to >> >>> beagleboard+unsubscr...@googlegroups.com. >> >>> For more options, visit https://groups.google.com/d/optout. >> >>> >> >> >> >> -- >> >> For more options, visit http://beagleboard.org/discuss >> >> --- >> >> You received this message because you are subscribed to a topic in the >> >> Google Groups "BeagleBoard" group. >> >> To unsubscribe from this topic, visit >> >> https://groups.google.com/d/topic/beagleboard/p9423s6B4lg/unsubscribe. >> >> To unsubscribe from this group and all its topics, send an email to >> >> beagleboard+unsubscr...@googlegroups.com. >> >> For more options, visit https://groups.google.com/d/optout. >> >> >> > >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/p9423s6B4lg/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
