Hello
I have finally managed to get my hands on an BBB and started to try and get
my system up and running the way I need by building a kernel (3.14.1).
I am attempting to use the USB client port (USB0) in host mode and think I
have done all the things necessary to get this working:
Kernel config has EHCI enabled and set to host only
Hardware mod on the board to short pins 4&5 of micro socket to force USB-ID
low to indicate host mode.
Changed the arch/arm/boot/dts/am335x-bone-common.dtsi file to put it into
host mode
usb@47401000 {
status = "okay";
dr_mode = "host";
};
usb@47401800 {
status = "okay";
dr_mode = "host";
};
No matter what I plug in nothing gets identified ???
Plugging into the USB1 host port is fine so the kernel is configured
correctly.
Boot log shows ports being identified:
[ 2.057294] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 2.063996] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned
bus number 1
[ 2.072673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.079868] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.087467] usb usb1: Product: MUSB HDRC host driver
[ 2.092722] usb usb1: Manufacturer: Linux 3.14.1 musb-hcd
[ 2.098402] usb usb1: SerialNumber: musb-hdrc.0.auto
[ 2.104856] hub 1-0:1.0: USB hub found
[ 2.108880] hub 1-0:1.0: 1 port detected
[ 2.117574] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 2.124275] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned
bus number 2
[ 2.133045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140253] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.147851] usb usb2: Product: MUSB HDRC host driver
[ 2.153105] usb usb2: Manufacturer: Linux 3.14.1 musb-hcd
[ 2.158786] usb usb2: SerialNumber: musb-hdrc.1.auto
[ 2.165268] hub 2-0:1.0: USB hub found
[ 2.169312] hub 2-0:1.0: 1 port detected
Any ideas ???
Thanks
marc
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
