Do any of the LED's flash or turn on when you try to power up the board?
On 5 April 2014 03:18, <madhuka...@gmail.com> wrote: > I was booting my BBB using eMMC. After that i powered down BBB and > inserted a blank 2GB uSD card. It stopped to boot. I removed the 2GB uSD > card but it is still not booting. I even rewrote the eMMC as described in > http://derekmolloy.ie/write-a-new-image-to-the-beaglebone-black/ but it > still not booting up. eMMC however gets written as all the LED's flash > after the completion. > Please Help. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.