On 4/24/14, 12:55 PM, "rh_" <[email protected]> wrote:
>On Thu, 24 Apr 2014 10:51:59 -0700 (PDT) >[email protected] wrote: > >--8<-- > >> Currently my small company produces simple Arduino PCBs and the >> producing process is just to send the Gerber file with the BOM and we >> are ready to go. After I saw Gerald Coley speaking saying >> this:https://www.youtube.com/watch?v=oZ0OPT5s9aQ I'm wondering what >> else I need to know in order to have a 500 units order working. Is >> the trick in the evaluation quality test? or is it that I have to >> flash some of the EEPROM, eMMC,uSD in a special way? > >You should contact your PCB maker. Send them the Gerber and the BOM. >Then sit down when they send you the quote, or at least hold on to >something. I think the BBB is a 6-layer board and some cannot do >them. The biggest problem is the 2.9mil spacing between traces and pads of the eMMC part. This will make the board very expansive. Regards, John > >-- >For more options, visit http://beagleboard.org/discuss >--- >You received this message because you are subscribed to the Google Groups >"BeagleBoard" group. >To unsubscribe from this group and stop receiving emails from it, send an >email to [email protected]. >For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
