Hi all, I have a custom cape made for BB black, and when I have the cape plugged in to the BB and turning my BB on, it seems to stop the kernel from booting properly. I have Linux angstrom installed. Im attaching the kernel trace here so that everyone knows what happens (I got this using FTDI to USB connection, that we know what process being performed during boot up). Can anyone help in identifying the cause of this?
Cheers! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14) musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 OMAP SD/MMC: 0 mmc_send_cmd : timeout: No status update reading u-boot.img reading u-boot.img U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14) I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! mmc0(part 0) is current device mmc_send_cmd : timeout: No status update Card did not respond to voltage select! No micro SD card found, setting mmcdev to 1 mmc_send_cmd : timeout: No status update mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 1 reading uEnv.txt 68 bytes read in 4 ms (16.6 KiB/s) Loaded environment from uEnv.txt Importing environment from mmc ... gpio: pin 55 (gpio 55) value is 1 4270840 bytes read in 747 ms (5.5 MiB/s) gpio: pin 56 (gpio 56) value is 1 24129 bytes read in 51 ms (461.9 KiB/s) Booting from mmc ... ## Booting kernel from Legacy Image at 80007fc0 ... Image Name: Angstrom/3.8.13/beaglebone Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4270776 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 XIP Kernel Image ... OK OK Using Device Tree in place at 80f80000, end 80f88e40 Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.230222] omap2_mbox_probe: platform not supported [ 0.243657] tps65217-bl tps65217-bl: no platform data provided [ 0.329213] bone-capemgr bone_capemgr.8: slot #0: No cape found [ 0.368271] bone-capemgr bone_capemgr.8: slot #1: No cape found [ 0.407330] bone-capemgr bone_capemgr.8: slot #2: No cape found [ 0.446393] bone-capemgr bone_capemgr.8: slot #3: No cape found [ 0.479517] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 0.546538] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7 [ 0.561183] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22 [ 0.570321] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 0.761603] Unable to handle kernel paging request at virtual address e8bdd68f [ 0.770997] pgd = c0004000 [ 0.774508] [e8bdd68f] *pgd=00000000 [ 0.779157] Internal error: Oops: 5 [#1] SMP THUMB2 [ 0.785489] Modules linked in: [ 0.789458] CPU: 0 Not tainted (3.8.13 #1) [ 0.795248] PC is at page_address+0x14/0x98 [ 0.800692] LR is at omap_hsmmc_pre_dma_transfer+0x79/0xe4 [ 0.807816] pc : [<c0081dc0>] lr : [<c02bb605>] psr: 40000133 [ 0.807816] sp : df357e40 ip : 00010000 fp : 00000001 [ 0.822728] r10: df392c80 r9 : 00000001 r8 : df12fa10 [ 0.829512] r7 : c0625784 r6 : df3247bc r5 : df324740 r4 : c07039a0 [ 0.837989] r3 : e8bdd303 r2 : e8bdd303 r1 : 000003c0 r0 : c07039a0 [ 0.846468] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment kernel [ 0.856186] Control: 50c5387d Table: 80004019 DAC: 00000015 [ 0.863646] Process mmcqd/1 (pid: 71, stack limit = 0xdf356240) [ 0.871333] Stack: (0xdf357e40 to 0xdf358000) [ 0.876996] 7e40: df389218 df324740 df3247bc c0625784 df12fa10 c02bb605 df357e6c 80000193 [ 0.887621] 7e60: 00000002 df392c80 00000001 df389158 df389258 df389014 df389014 00000000 [ 0.898248] 7e80: df357ecc 00000000 df389158 c02bb6a3 df324400 c02aeeb5 df389154 df391158 [ 0.908874] 7ea0: df386000 df389014 df389014 df391158 df389000 c02b6b2b df391158 00000000 [ 0.919498] 7ec0: 00000000 c0044e15 00100100 00200200 00000004 df391158 df386000 df389000 [ 0.930122] 7ee0: df389014 00000000 df389000 df391158 00000000 c02b6f89 df2fe130 00000000 [ 0.940749] 7f00: 000000d7 df391158 df38901c df389014 df38901c df356000 df2fe130 00000000 [ 0.951373] 7f20: 00000001 df391158 00000000 c02b73d1 df183cc4 00000000 df389014 c02b7355 [ 0.961997] 7f40: 00000000 00000000 00000000 c003ca4b df356000 00000000 00000000 df389014 [ 0.972622] 7f60: 00000000 00000000 dead4ead ffffffff ffffffff df357f74 df357f74 00000000 [ 0.983247] 7f80: 00000000 dead4ead ffffffff ffffffff df357f90 df357f90 00000000 df183cc4 [ 0.993871] 7fa0: c003c9eb 00000000 00000000 c000c6fd 00000000 00000000 00000000 00000000 [ 1.004495] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.015118] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.025761] [<c0081dc0>] (page_address+0x14/0x98) from [<c02bb605>] (omap_hsmmc_pre_dma_transfer+0x79/0xe4) [ 1.038423] [<c02bb605>] (omap_hsmmc_pre_dma_transfer+0x79/0xe4) from [<c02bb6a3>] (omap_hsmmc_pre_req+0x33/0x3c) [ 1.051762] [<c02bb6a3>] (omap_hsmmc_pre_req+0x33/0x3c) from [<c02aeeb5>] (mmc_start_req+0x25/0xd4) [ 1.063518] [<c02aeeb5>] (mmc_start_req+0x25/0xd4) from [<c02b6b2b>] (mmc_blk_issue_rw_rq+0x77/0x228) [ 1.075500] [<c02b6b2b>] (mmc_blk_issue_rw_rq+0x77/0x228) from [<c02b6f89>] (mmc_blk_issue_rq+0x2ad/0x2e4) [ 1.088043] [<c02b6f89>] (mmc_blk_issue_rq+0x2ad/0x2e4) from [<c02b73d1>] (mmc_queue_thread+0x7d/0xcc) [ 1.100145] [<c02b73d1>] (mmc_queue_thread+0x7d/0xcc) from [<c003ca4b>] (kthread+0x61/0x72) [ 1.111009] [<c003ca4b>] (kthread+0x61/0x72) from [<c000c6fd>] (ret_from_fork+0x11/0x34) [ 1.121520] Code: 4a1d 0f9b fb01 2303 (f8d3) 238c [ 1.127743] ---[ end trace cc2721e5f51c3ea5 ]---
