You should be able to just press the power button once briefly and it shutdown. Assuming the image you are running has it. The latest image does have it.
After it powers down, then you can remove the power. We need to make sure the PMIC powers down all the rails to the processor in order. Gerald On Thu, May 22, 2014 at 2:17 PM, Miroslav Rudišin <rudi...@gmail.com> wrote: > By powering down you mean either: > - issuing power off sequence from the OS > - holding power button for 8 seconds > > Or is it also good enough just disconnecting power supply from wall outlet? > > Thanks. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.