From: Gerald Coley <ger...@beagleboard.org> Reply-To: <beagleboard@googlegroups.com> Date: Friday, May 23, 2014 at 12:53 PM To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> Subject: Re: [beagleboard] Supply required 5V/2A over micro USB
> 13000mA might be pushing it. You mean 1,300mA? http://www.ti.com/lit/ds/symlink/tps65217c.pdf Page 43 Regards, John > > Gerald > > > > On Fri, May 23, 2014 at 2:52 PM, Gerald Coley <ger...@beagleboard.org> wrote: >> I think that is the 800mA setting in the PMIC over current circuitry. >> >> Gerald >> >> >> >> On Fri, May 23, 2014 at 2:32 PM, Robert Nelson <robertcnel...@gmail.com> >> wrote: >>> On Fri, May 23, 2014 at 2:26 PM, Gerald Coley <ger...@beagleboard.org> >>> wrote: >>>> > Yes, but understand, you will only get 500ma out of it before the PMIC >>>> shuts >>>> > down depending on where the SW is currently set.I actually do not know on >>>> > the new image. Best case it 800mA. >>> >>> I still have it do the "i2c mw 0x24 1 0x3e;" in u-boot during bootup.. >>> So whatever that sets up the PMIC for. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to beagleboard+unsubscr...@googlegroups.com >>> <mailto:beagleboard%2bunsubscr...@googlegroups.com> . >>> For more options, visit https://groups.google.com/d/optout. >> > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
