I set up a similar development environment for someone a few months ago. I just posted a pdf document with the steps on my blog
http://blog.embeddedcoding.com/2014/06/beaglebone-black-remote-debug-with.html I used a Debian Wheezy host instead of Ubuntu but it might still be helpful to look through the eclipse setup. I did use Robert Nelson's BBB debian/linaro setup. Aaron On Thursday, May 29, 2014 4:00:56 PM UTC-4, Simon Platten wrote: > > Can you suggest a good site for setting up eclipse with the Linaro > toolchain, I've got the toolchain installed on ubuntu 14.04 in: > > /home/simon/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux > > In eclipse, I have created a C Project and in the Properties under C/C++ > Build, Settings, I have the Cross Settings, Prefix set to: > > arm-linux-gnueabihf- > > Path set to: > > /home/simon/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux/bin > > Cross GCC Compiler, Command set to gcc > Cross GCC Linker, Command set to gcc > Cross GCC Assemlber, Command set to as > > When I build the project I get: > /bin/sh: arm-linux-gnueabihf-gcc: command not found HelloWorldBBB > C/C++ Problem > > > > > > On Thursday, 29 May 2014 20:33:52 UTC+1, Simon Platten wrote: >> >> Thank you Robert, I've now reflashed both my Beaglebone Blacks with >> Debian and have downloaded the linaro toolchain, so far everything has gone >> really well...about to set-up eclipse on my ubuntu virtualbox and then try >> remote debugging. >> >> On Wednesday, 28 May 2014 21:12:37 UTC+1, RobertCNelson wrote: >>> >>> >>> >>> >>> On Wed, May 28, 2014 at 3:06 PM, Simon Platten <simona...@gmail.com> >>> wrote: >>> >>>> Thank you, I'll look into it and give it a go. >>>> >>>> Are they're any shortfalls to be aware of, anything that isn't >>>> supported? >>>> >>> >>> Well, right now we support more devices and capes out of the box then >>> the last official Angstrom release, but if you notice something we broke >>> kernel wise just ping us. We tried to test everything, but everyone has >>> unique hardware. >>> >>> Otherwise the biggest change, it's a "armhf" ("gnueabihf") based system, >>> so your "gnueabi" compiler won't work. (Well i did had the 'armel' library) >>> so "hello world" "gnueabi" applications will run, but nothing more complex >>> then that. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.