Using http://www.machinekit.io/ and BeagleBone Black plus a Replicape or BeBoPr to build a 3D printer? Well, now you can print Boris, the BeagleBoard.org mascot!
I just got some tiny test prints from Shapeways and they looked good, so I scaled up the model and uploaded it to Thingiverse[2]. The picture below[1] has a USB thumb drive of Boris (previously available on http://boardzoo.com/, but currently out of production) that was used as a reference and 4 miniature test prints in different materials (WSF, EP, BD, and ALU, respectively). Have fun and share lots of pictures of your prints! Please share back any improvements to the model. [1] https://plus.google.com/102344295024422039483/posts/AVdK5rh2hGD [2] http://www.thingiverse.com/thing:359076 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.