On Tue, Jun 10, 2014 at 9:24 PM, Justin Morgan <jdm...@gmail.com> wrote: > I am using a BBB running the new Debian image. I have connected a DS1307 RTC > (via a "Tiny RTC I2C modules" breakout board) to I2C2, and have added > "cape_enable=capemgr.enable_partno=BB-BONE-RTC" to uEnv.txt such that my BBB > does see this RTC as /dev/rtc1. > > I want to synchronize the system clock from this RTC on boot (and not the > BBB's rtc-omap that is registered as /dev/rtc0), so I modified > /etc/init.d/hwclock.sh such that HCTOSYS_DEVICE=rtc1. I thought that should > do it... after all, I was able to get a Raspberry Pi running Raspian to > synchronize with a DS1307 on boot following these instructions: > http://blog.elevendroids.com/2012/12/setting-up-hardware-rtc-in-raspbian/ > > However, my BBB keeps synchronizing with rtc-omap on boot... and doesn't > seem to be running hwclock.sh, either (time after boot is back in May, not > the current time as I confirm by sudo hwclock -r -f /dev/rtc1). > > So where is Debian actually synchronizing the time in the boot process, and > how do I tell it I want to use my battery-backed clock?
So we have an init script to get the clock in the 'ball park' https://github.com/beagleboard/image-builder/blob/master/target/init_scripts/generic-debian.sh#L19 It's located at /etc/init.d/boot_scripts.sh You can either remove "/etc/timestamp" and it'll ignore resetting the clock on bootup. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.