CE testing that was does not cover ESD testing. This board has never been tested for ESD.
Gerald On Fri, Aug 1, 2014 at 12:21 PM, Richard Ketcham <rich.ketc...@gmail.com> wrote: > Hello, > > I'm interested in CE testing a device which includes the BBB. In order to > determine if the device will pass, I've been shocking it with an ESD gun > (both contact and discharge). I have been running into an issue where when > I shock the ground plane with a 4kV contact discharge, the BBB Ethernet > becomes unresponsive and does not recover until I cycle the power. I've > tried this test with only the BBB and it reacts the same way. I see there's > a CE certification which says it passes 4kV contact discharge, but I've > been unable to replicate it. > > > Are there caveats to the CE certification which the BBB has relating to > ESD testing? > Is this a self certification? > Do you have any suggestions on how mitigate this problem? > > I will appreciate any information you can provide on this problem. > Thanks, > Rich > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
