Actually I misspoke, the image is just under 2 GB not over 2 GB but the original point still stands.
On Thursday, August 14, 2014 2:20:16 PM UTC-4, sean.lui...@gmail.com wrote: > > Hello, > > I want to set up a master BBB running Ubuntu 13.10 saucy from the eMMC. I > then would like to duplicate everything about that master board and stick > it on a new board, including users, files and services. I'm wondering if > this is possible. > > I have already tried the procedure listed at > http://elinux.org/BeagleBone_Black_Extracting_eMMC_contents but it > doesn't seem to work. I can extract an image file from the master, but all > attempts to flash the image onto the new BBB have not succeeded. When I > hold the S2 button and power on the device, the USR0 light blinks shortly > as expected but then persists after only 20 seconds, but the image file is > over 2GB so it should take longer than that. > > I have tried altering the if to be /dev/mmcblk0 considering that is what > fdisk returns for me when run on the master. I have tried the bs at 10M as > well as altering it to 1M and gone to no avail. I have deleted everything > off of the new BBB when it is mounted on Windows and nothing happened. I > have set the primary partition on the uSD card to be active. I have tried > writing the resulting image to the uSD using Win32DiskImager. > > I'm wondering if anyone has any ideas as to either a solution to my > current method or an alternative that is just as good. > > Thanks. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.