Hi everyone! I've got my BBB rev. C set up as a data logger for a serial data stream from an Arduino. It basically takes this data, uploads it to xively, and checks certain values for exceeded thresholds and sends an email if found. This works fine. However, after the script has been running for several days, it stops working. The script itself seems to continue running, but it stops acknowledging that it's receiving any data or trying to upload to xively. If I ctrl+c out of the script and restart it, it starts working fine again. The device it's connected to continues to work properly regardless of whether the BBB is logging anything, so I don't believe that the problem is with it.
Is there any way to determine where the problem lies? (BBB, python, etc.?) Here's a copy of my code (please don't mock it too much, I'm a Python noob) : http://susepaste.org/399d9d1f (This is what the data looks like if it makes any difference: 2014-08-31 20:51:38.841985 91,h,44 2014-08-31 20:51:40.063139 92,t,72 2014-08-31 20:51:44.727206 92,h,42 2014-08-31 20:51:45.463794 90,t,71 2014-08-31 20:52:17.112091 90,h,44 ...) I've Googled around, and haven't really found anything regarding something like this. There were a couple of random bulletin board posts that seemed similar, but they all went off into no-answer-land. Thanks in advance :) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.