@Robert I'll have you know that you've broken $optargs in the initial stage uEnv.txt.
In case you did not know already . . . On Sun, Sep 7, 2014 at 6:32 PM, William Hermans <yyrk...@gmail.com> wrote: > hmm so actual that did not work for me either, which I do not know is a > bug or what so here is what I had to do. > > First check output of: > > *$ cat /sys/module/kernel/parameters/consoleblank* > *600* > > It'll probably be 600 as above, which is ten minutes( 600 seconds ). > > So . . . > > *nano /boot/uEnv.txt* > and uncomment this line: > *#cmdline=quiet init=/lib/systemd/systemd* > then add at the end *consoleblank=0* > Which gives you > > > *cmdline=quiet init=/lib/systemd/systemd consoleblank=0* > reboot the beaglebone and when it comes back up. > > *root@arm:~# cat /sys/module/kernel/parameters/consoleblank* >> *0* >> > > > On Sun, Sep 7, 2014 at 6:07 PM, William Hermans <yyrk...@gmail.com> wrote: > >> errr sorry, that should only be *setterm -blank 0* >>> >> >> On Sun, Sep 7, 2014 at 6:03 PM, William Hermans <yyrk...@gmail.com> >> wrote: >> >>> $ setterm -powersave off -blank 0 >>> >>> On Sun, Sep 7, 2014 at 5:15 PM, Moscowbob <moscow...@gmail.com> wrote: >>> >>>> >>>> BBB boot from tftp and nfs - >>>> kernel: 3.15.10-bone8 >>>> rootfs: debian-jessie-console-armhf-2014-08-13 >>>> >>>> Hardware: >>>> BBB A5C >>>> Circuitco LCD4 cape >>>> Circuitco RS232 cape >>>> >>>> /home/rob/rootfs/boot/uEnv.txt >>>> >>>> uname_r=3.15.10-bone8 >>>> cmdline=quiet init=/lib/systemd/systemd >>>> *optargs="consoleblank=0"*. >>>> >>>> I used this reference >>>> http://elinux.org/Beagleboard:BeagleBone_Black_FAQ >>>> <http://elinux.org/Beagleboard:BeagleBone_Black_FAQ#Is_there_a_way_to_prevent_my_HDMI_monitor_from_sleeping_while_using_my_BBB.3F> >>>> but >>>> the display is still blanking after 10 minutes. >>>> >>>> Would appreciate some guidance. >>>> >>>> Thanks >>>> Rob >>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.