Have you visited (inspire.logicsupply.com) http://inspire.logicsupply.com/p/tutorials_3943.html and the WiFi installation guide? Cheers
On Sunday, September 21, 2014 1:03:24 PM UTC-4, meino....@gmx.de wrote: > > Hi, > > after some struggle to receive a package sent from the netherlands > to germany I just received my UWN200 WLAN dongle/antenna thingie. > > I already compiled the driver an loaded it, which works (at least for > me as a newbie to WLAN). > dmesg shows: > === pAd = e0ebe000, size = 852552 === > > [ 4965.195793] --> RTMPAllocTxRxRingMemory > [ 4965.196032] <-- RTMPAllocTxRxRingMemory, Status=0 > [ 4965.197790] <-- RTMPAllocAdapterBlock, Status=0 > [ 4965.197817] NumEndpoints=8 > [ 4965.197839] BULK IN MaxPacketSize = 512 > [ 4965.197860] EP address = 0x84 > [ 4965.197879] BULK IN MaxPacketSize = 512 > [ 4965.197898] EP address = 0x85 > [ 4965.197919] BULK OUT MaxPacketSize = 512 > [ 4965.197937] EP address = 0x 8 > [ 4965.197957] BULK OUT MaxPacketSize = 512 > [ 4965.197976] EP address = 0x 4 > [ 4965.197994] BULK OUT MaxPacketSize = 512 > [ 4965.198013] EP address = 0x 5 > [ 4965.198033] BULK OUT MaxPacketSize = 512 > [ 4965.198052] EP address = 0x 6 > [ 4965.198071] BULK OUT MaxPacketSize = 512 > [ 4965.198090] EP address = 0x 7 > [ 4965.198109] BULK OUT MaxPacketSize = 512 > [ 4965.198128] EP address = 0x 9 > [ 4965.198155] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8 > [ 4965.198176] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4 > [ 4965.198197] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5 > [ 4965.198218] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6 > [ 4965.198238] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7 > [ 4965.198259] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9 > [ 4965.198281] STA Driver version-3.0.0.3 > [ 4965.205052] -->MT7601_Init(): > [ 4965.206989] Chip specific bbpRegTbSize=0! > [ 4965.207020] Chip VCO calibration mode = 0! > [ 4965.207272] NVM is EFUSE > [ 4965.207301] Efuse Size=0x1d [Range:1e0-1fc] > [ 4965.207324] Endpoint(8) is for In-band Command > [ 4965.207346] Endpoint(4) is for WMM0 AC0 > [ 4965.207367] Endpoint(5) is for WMM0 AC1 > [ 4965.207388] Endpoint(6) is for WMM0 AC2 > [ 4965.207408] Endpoint(7) is for WMM0 AC3 > [ 4965.207428] Endpoint(9) is for WMM1 AC0 > [ 4965.207448] Endpoint(84) is for Data-In > [ 4965.207468] Endpoint(85) is for Command Rsp > [ 4965.207494] Allocate a net device with private data size=0! > [ 4965.207657] Allocate net device ops success! > [ 4965.207693] The name of the new ra interface is ra0... > [ 4965.207723] RtmpOSNetDevAttach()---> > [ 4965.209915] <---RtmpOSNetDevAttach(), ret=0 > [ 4965.209948] <===rt2870_probe()! > [ 4965.215064] usbcore: registered new interface driver rt2870 > > > Before digging deeper into this topic I would like to do a quick > check, whether the hardware seems to work (just in case or warranty). > > For example: > Is there a way to list the names (no illegal actions are intended!!!) > of the WLANs around me without doing the whole WLAN configuration > stuff? > > Or any othe quick check which sends/receive some data somewhere? > > Thank you very much in advance for any help! > Best regards, > mcc > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.