Hello, Thanks for your immediate response. I follow the steps mentioned by you and try to deploy latest image on sd card. Now i am able to boot Android 4.4 Kitkat on my Beagelbone black through Micro SD card. I follow the steps mentioned in http://elinux.org/Beagleboard:Android but unable to deploy image from micro sd card to eMMC. Could you help me to solve this issue? Is there any other way to deploy android image on eMMC?
Kindly reply as early as possible. Awaiting for your response. On Tue, Oct 21, 2014 at 8:57 PM, Andrew Henderson <hende...@icculus.org> wrote: > There is a newer version of Android available. The version referenced on > the elinux.org page is JellyBean 4.2.2, and the newer one is KitKat > 4.4.4. You can get the newer one at bbbandroid.org. > > The easiest way to troubleshoot this sort of thing is to use an FTDI cable > to monitor the BBB during boot. This will allow you to capture the debug > output from the bootloader and the kernel. Since you are using Windows XP, > you won't be able to natively mount the partitions of your microSD card and > look at them to ensure that you wrote the image properly. You could try > using an application like Linux Reader to see the partitions on your Win32 > machine: http://www.diskinternals.com/linux-reader. > > You need to verify two things: > > 1. Did you write the image properly to the microSD card? There can be a > few causes for this, including not decompressing the image prior to writing > and getting a bad write to the microSD card. If you can see the four > partitions (one VFAT, three EXT4), then you probably wrote the image OK. > > 2. Is the bootloader at least getting into kernel boot? You'll need to > see the FTDI output to determine this. > > Andrew > > > On Tuesday, October 21, 2014 5:03:56 AM UTC-4, Prasad Marathe wrote: >> >> >> Hello, >> >> I am trying to deploy Android image on beaglebone black as mentioned in >> http://elinux.org/Beagleboard:Android this URL. But after following the >> steps mentioned, User LED's are not blinking. So i am not able to deploy >> the image on beaglebone black. kindly help to sort this issue. >> I am using following tools for deployment: >> >> Host machine - 32 bit Windows XP service pack 3 >> Beaglebone black - rev 00A5 S/N 2014BBBK0661 running BoneScript 0.2.4 at >> 192.168.7.2 >> OS on eMMC - Debian >> Supply - 5V 2A Adapter >> SD card used for Android image deployment - 8GB class 4 SanDisk Micro SD >> card >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/_74iD6epCPo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Thanks and Regards, Prasad B. Marathe. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
