Hi Robert, withThis worked for me: /etc/dnsmasq.conf #disable DNS by setting port to 0 port=0
interface=usb0 dhcp-range=192.168.7.1,192.168.7.1 #one address range /etc/network/interfaces auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp allow-hotplug usb0 iface usb0 inet static address 192.168.7.2 netmask 255.255.255.0 network 192.168.7.0 gateway 192.168.7.1 I'm using your 2014/11/11 jessie image and after I did an apt-get update/upgrade I lost the ability to connect with ssh. removing udhcpd and adding the above configuration for dnsmasq restored my ability to connect via ssh on both interfaces. On Thu, Nov 13, 2014 at 4:06 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > > Sure, as long as we can configure dnsmasq to do the work of udhcpd, > > i'm all for it.. ;) > > https://wiki.debian.org/HowTo/dnsmasq > > /etc/dnsmasq.conf > > dhcp-range=usb0,192.168.7.1,192.168.7.3,12h > > look sane? > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
