your answer : http://hipstercircuits.com/enable-spi-with-device-tree-on-beaglebone-black-copy-paste/
Enjoy, Le Tue Dec 02 2014 at 15:58:53, <motar...@gmail.com> a écrit : > Hi, > > I have to connect 2 lcd on a BBB via SPI interfaces (I use fbtft driver). > I can only use SPI0 because SPI1 pins are used by I2C for cape eeprom. > The problem is that SPI0 has only one CS pin. Is it possible to tell the > SPI driver to use a GPIO pin as another CS line ? > Am I forced to write a full driver to emulate CS with a GPIO pin ? > > Thanks in advance for your help. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.