The eMMC does not use GPMC. It use the MMC function on those pins. Only one device can be supported on those pins. If you want 8G your best bet would be to replace the 4G part with an 8G part.
Gerald On Wed, Dec 31, 2014 at 3:11 AM, <dhvani...@gmail.com> wrote: > Hi > > I am new to BBB. The BBB has 4GB emmc support which is using GPMC pins. I > want to add another 8GB 8bit Nand flash using GPMC. We are using same data > bus of GPMC data. The difference is only control signal. > We are using MT29F64G08CFACA chip for 8GB NAND flash. > > Is there any support of multiple Nand flash using GPMC in linux kernel > 3.8.13 ? > If yes, How can add 8GB Nand flash along with 4GB eMMC in linux kernel > device tree? > > Thanks in Advanced, > Dhvanil > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
