a photodetector will isolate your BBB from mains voltages. any other way and you will still need a way to isolate your AC light from mains. if you need to know which switch of a 3 way switch array has turned on the light you will need to monitor the crossover wires from each 3 way switch you will still need a way to somehow isolate your BBB from the mains voltages.
On 1/10/2015 2:40 PM, Carlos Cesario wrote: > Hi Wulf Man, thank you by your response. > > But with this I will need add one more "device"(photodector). I would > like to usage the current structure, but I dont have idea how dectect > Lamp status when using 3 way switch. > > Best regards > > Carlos > > Em sábado, 10 de janeiro de 2015 18:32:14 UTC-2, Carlos Cesario escreveu: > > Hello Guys, > > Does someone could help me with GPIO and Three Way Switches? > > I 'm plannining usage the BBB with relays and my current > electrical structure including the Switches, (like the draw attached). > > My main problem is identify when the Lamp is High when used by > Switch. I cant get the current lamp status. > > Does someone have idea how todo this? > > best regards, > > > Carlos > > > > <http://www.4shared.com/download/VxJPw6Yzba/iligaao_com_interruptor_parare.jpg?lgfp=3000> > > > <http://i.stack.imgur.com/cTU8P.jpg> > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to beagleboard+unsubscr...@googlegroups.com > <mailto:beagleboard+unsubscr...@googlegroups.com>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.