All is now clear Thanks. On Friday, 16 January 2015 14:36:51 UTC, RobertCNelson wrote: > > On Fri, Jan 16, 2015 at 7:23 AM, Steve Osselton > <steve.o...@prismtech.com <javascript:>> wrote: > > I have been maintaining an up to data Ubuntu 14.04.1 image and TI kernel > on > > an SD card > > then flashing to the eMMC using bbb-eMMC-flasher-eewiki-ext4.sh > > > > Now when I do this the Bone appears not to have USB ethernet after > rebooting > > to eMMC, > > am pretty sure this has worked previously. Booting from SD card and USB > > ethernet starts fine. > > Bote that bone is actually booting OK from eMMC as can connect via wired > > ethernet. > > > > Any ideas what is happening here? > > That's expected... You ran "bbb-eMMC-flasher-eewiki-ext4.sh" which > creates a 'single' ext4 partition. > > The g_multi driver only works with two or more partitions, thus the > logic just enables g_serial in that situation: > > > https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L84 > > > under: /opt/scripts/boot/am335x_evm.sh > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.