Hello, i'm trying to create a clone of my beaglebone image, but it seems i cant do it. I tried doing ; - Get a 4GB or larger uSD card that is FAT formatted. - Download beagleboneblack-save-emmc.zip <https://s3.amazonaws.com/beagle/beagleboneblack-save-emmc.zip> and extract the contents onto your uSD card. - Eject uSD card from your computer, insert into powered-off BeagleBone Black and apply power to your board while holding down the S2 button (release button a couple seconds after boot). - You'll notice USR0 (the LED closest to the S1 button in the corner) will (after about 20 seconds) start to blink steadily, rather than the double-pulse "heartbeat" pattern that is typical when your BeagleBone Black is running the typical Linux kernel configuration. - It'll run for a bit under 10 minutes and then USR0 will stay ON steady. That's your cue to remove power, remove the uSD card and put it back into your computer.
But nothing happens. Any other ideas how to create image clone ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.