Hello,

The normal sequence is (S2 button not pushed):

   - MC1 (eMMC on-board flash), MMC0 (SD card), UART0, USB0

S2 button pushed:

   -  SPI0, MMC0 (SD card), USB0, UART0

so ...  try flashing without the serial debug cable

good luck

On Thursday, 29 January 2015 19:05:36 UTC+1, Blake Hollingsworth wrote:
>
> Just some additional clarification.  I unzipped the archive before writing 
> the image to the SD card.  I let go of S2 (not S3) after all 4 lights lit 
> up.
>
> If more information/clarification is required, please don't hesitate to 
> let me know.  I am anxious to get this thing flashed and willing to work 
> with anyone that wants to help.
>
> On Tuesday, January 27, 2015 at 4:57:26 PM UTC-5, Blake Hollingsworth 
> wrote:
>>
>> I have a REV A5A Beaglebone Black.  
>>
>> I downloaded the image Debian (BeagleBone Black - 2GB eMMC) 2014-05-14 
>> <http://debian.beagleboard.org/images/BBB-eMMC-flasher-debian-7.5-2014-05-14-2gb.img.xz>
>>   
>> (
>> http://debian.beagleboard.org/images/BBB-eMMC-flasher-debian-7.5-2014-05-14-2gb.img.xz)
>>  
>> listed on http://beagleboard.org/latest-images.
>>
>> Using Win32DiskImager I wrote the image to a 16GB microSD card.  I 
>> inserted the card into the BBB, attached the serial debug cable (all other 
>> cables removed).  Press S2 and hold down, apply power, let go of S3 after 
>> all 4 lights have lit up and things start flashing.
>>
>> I have tried several times, leaving the board for 30 mins to well over 1 
>> hour.  Lights continuously blink in a repeating pattern.  I typically get 
>> frustrated and pull power, and restart.  Angstrom remains on the board. 
>>
>> The serial debug output I received is here: http://pastebin.com/AS0T8Xrt
>>
>> Any help would be greatly appreciated!
>>
>> -Blake
>>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to