Hi All, sorry for the silence. We have not produced any capes yet as we have been talking to beagle bone about producing an variant of the BBB with more memory, accelerometer/gyro and altimeter on. This will change the form factor of the current cape design.
If there is enough interest for the current cape then we can produce in small batches but as of yet there have been 2 people and it would result in a high cost as they will be mostly hand soldered. We could supply a kit if you are feeling brave of the PCB and components to solder ? Marcel and Eric if you are still interested in discussing further please contact us directly. Regards Marc On Tue, Feb 10, 2015 at 3:49 AM, <eric.johnsto...@gmail.com> wrote: > Any updates for the Cape? I'm curious in this as well. I've got all the > componets in piece mail but its proving more difficult to combine the code > and GUI...albeit that I'm an extreme novice and my skills in programming > are of course, rudementary. > > I have already soldered in an RS232 cable to the 16pin OBD connector and > using an Arduino with CAN shield to set an automatic environment while the > beaglebone boots. Once the BBB boot sequence is complete, the Arduino then > reads inputs from the beaglebone and adjusts according to the user inputs. > The GUI is of course proving to be very challenging for me in how I am > looking to present the information from the vehicle CAN buses and GPRS, > GPS, accelerometer and gyro. My intent is to match the factor skins and > coloring as best I can. > > It sounds awesome in theory and concept...getting the screen and functions > to play out what my mind is seeing may be two different things > > What's the status? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/tfQ7tGfcpsI/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
