Hi Jeffa, Thanks for the reply, but isn't this for any kernel lower than 3.14, as there is a cape manager in any kernel lower than that?
On Tuesday, February 24, 2015 at 5:05:23 PM UTC, Jeff Albrecht wrote: > > I found this post to be helpful when I was experimenting with the DS18B20 > http://rodaw.me/1zDvkE4 > > - jeffa > > On Tuesday, February 24, 2015 at 9:20:00 AM UTC-7, Sam Hughes wrote: >> >> Hi all, >> >> Im struggling currently with configurating the GPIO pins to be able to >> use Dallas Onewire on the Beaglebone Black. >> I want to be able to use Dallas Onewire to be able to read the >> temperature, but with using Kernel 3.14 (Ubuntu 14.04.1 armhf). >> Currently, I cannot get my head around how to configure the DTS files to >> be able to add Dallas Onewire into the Device Tree as I want to be able to >> setup everything at boot and not use Cape Manager (This doesn't exist any >> more). >> >> Thanks in advance. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.