Hi, How many time did you pressed the power button to get it on? did you only connect the 5vdc power supply or also the Usb cable to computer? I'm having the same issue I tried what it says here: http://elinux.org/Beagleboard:BeagleBone#Board_Does_Not_Power_On.2C_Power_LED_Flashes.5BAll_Revisions.5D "When removing power, hold the reset button DOWN." But I didnt manage to get it to work does the usb cable need to be connected to or only the 5dcv?
I also tried to flash it but it doesnt happens what it supposed to according to what it says here:http://elinux.org/Beagleboard:Updating_The_Software#Procedure El viernes, 22 de noviembre de 2013, 8:41:41 (UTC-6), Bert Lindner escribió: > > > Just had a 5V powered Beaglebone Black seemingly die on me. First the > power led kept blinking, then after removing the (BB Toys CAN) cape the > power led would flash just once after applying power. Looking back in > previous threads this seemed to mean I killed the board somehow; there was > also a GPS module attached to one of the UARTs and a probably power hungry > USB wlan stick that I'm trying to get to work, so a power hungry setup. > > I was ready to declare it dead, it remained just flashing once after > repeatedly unplugging and reattaching the power supply. > > However I noticed the single power led flash would also happen if I > pressed the power button (leaving the 5V plug in). Doing that repeatedly > seems to have revived the board, will see if new problems occur. For now it > behaves normally. > > Is this expected behaviour? > > Best, > > -Bert > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
