On Sat, Mar 7, 2015 at 12:52 PM, Brian Lloyd <br...@lloyd.aero> wrote:
> > > On Sat, Mar 7, 2015 at 12:48 PM, Walker Archer <warcher...@gmail.com> > wrote: > >> I have a project where a BeagleBone Black will be completely inside a >> case. But I would really like to be sure that the board gets powered down >> properly when shutting down. Ideally I'd like to have a panel-mounted LED >> that mimicked the BBB power LED. >> > > How about a plastic light-pipe to carry the light from the board-mounted > LED to the front panel? It is a mechanical solution but pretty simple. > Mouser lists over 3500 options for doing this. Go to the Mouser web site and search on "light pipe". -- Brian Lloyd 706 Flightline Drive Spring Branch, TX 78070 br...@lloyd.aero +1.210.802-8FLY (1.210.802-8359) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.