Hi Robert, How to access /dev/ttyS4 in jessie? Only /dev/ttyS[0-3] were created and /lib/firmware/BB-UART4-00A0.dtbo is gone.
Thanks, Enoch. P/S I am using logic supply CBB-TTL-232 with UART4. Robert Nelson <robertcnel...@gmail.com> writes: > On Sun, Mar 8, 2015 at 5:42 PM, Enoch <i...@hotmail.com> wrote: >> Thanks Robert, >> >> Letting your jessie image update itself brought python to the latest 2.7.9 >> version which is a good news. > > I saw that yesterday, suprised me as: > > https://packages.debian.org/jessie/python > > still only lists 2.7.8... > >> Is there any write-up on BBB jessie? I see that wheezy serial port naming >> /dev/ttyO* was replaced by the traditional /dev/ttyS* > > So going forward /dev/ttyS* is the new default.. However if your > running systemd you won't notice the serial console changes for > login... For /dev/ttyO* -> /dev/ttyS* we do have a udev rule setup.. > > https://github.com/RobertCNelson/omap-image-builder/blob/master/tools/setup_sdcard.sh#L1045 > > just not fully tested.. but it worked last week.. > > Hopefully i've done enough, where most people won't notice. ;) > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.