On Tuesday, March 10, 2015 at 1:45:57 PM UTC-4, d...@panaton.com wrote: > > I would like get in touch with the board designer(s) of the Weather Cape. > I have an RFP for a project that requires a custom version of the board. > Would anyone be able to please provide a contact or forward my contact > info. > Dejan Nenov, d[at]panaton[dot]com tel. 415-999-four-four-five-zero > Thank you! >
I have a couple of comments about this board. One is that, if you care about humidity sensing and you're going to spend money spinning up a board, why not get the Sensirion SHT25 with 2% max RH tolerance? Rev B's HPP828E031 sensor is an improvement over Rev A's SHT21, but you can do better for just a few dollars more. Another comment is that, if you are really going to use this board for weather or environmental monitoring, I would be concerned about picking up heat from the BBB itself. It is burning a few Watts of power after all, and in an enclosure that will make quite a difference. It would be a good idea to move the temperature sensor to the edge of the board, preferably on a finger of PCB that you can isolate from the rest of the BBB. Even better, put the sensor on a remote with a plug-in cable. Craig -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.