Did you try to flash a recent image? http://beagleboard.org/latest-images For latest BBB I (Rev. C) would recommend http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBB_Rev_C_.284GB_eMMC.29
My BBB was not working out of the box. The "latest images" end of Fabruary also made problems. But the actual one is working fine. You can update the kernel and the confirguration after flashing to your needs. Chilli Am Samstag, 14. März 2015 12:56:00 UTC+1 schrieb Rimvydas Janušauskas: > > Hello, when i started a project with BBB i noticed that my ethernet not > working , i don't really now if it's hardware or software problem, because > i never used it until now(internet over usb was enough). So any ideas how > to fix it ? > > My dmesg : > > eth0: initializing cpsw version 1.12 (0) > [ 97.431262] net eth0: phy found : id is : 0x7c0f1 > [ 97.431282] libphy: PHY 4a101000.mdio:01 not found > [ 97.436333] net eth0: phy 4a101000.mdio:01 not found on slave 1 > [ 97.446057] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 99.439002] libphy: 4a101000.mdio:00 - Link is Up - 100/Full > [ 99.439056] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 99.502866] IPv6: eth0: IPv6 duplicate address > fe80::6eec:ebff:fe5d:596b detected! > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
