Thank you very much for the repeated support, but any ways i have tried to flash my eMMC with latest image via SD (in middle i failed )after which i was not able to login to, may be my eMMC is corrupted now , i am trying to flash a new latest image on to my board in which i am facing many problems please answer some of my quires at thread named *Unable to Flash the internal eMMC of BBB Rev C *
On 25 March 2015 at 16:39, Frank Agius <ftag...@gmail.com> wrote: > > > On Monday, March 23, 2015 at 9:42:08 PM UTC-4, Shyam D wrote: >> >> No, the first time it succedded but dont know why the second time it >> started saying >> >> make -C /lib/modules/3.8.13-bone47/build M=/root/lddgeek modules >>> make[1]: Entering directory `/usr/src/linux-3.8.13-bone47' >>> make[1]: Warning: File `/usr/src/linux-3.8.13-bone47/arch/arm/Makefile' >>> has modification time 1.2e+03 s in the future >>> make[2]: Warning: File `scripts/Makefile.lib' has modification time >>> 1.2e+03 s in the future >>> CC [M] /root/lddgeek/module.o >>> /root/lddgeek/module.c: In function 'module_start': >>> /root/lddgeek/module.c:7:1: warning: control reaches end of non-void >>> function [-Wreturn-type] >>> LD [M] /root/lddgeek/Module.o >>> make[2]: warning: Clock skew detected. Your build may be incomplete. >>> Building modules, stage 2. >>> make[2]: Warning: File `scripts/Makefile.lib' has modification time >>> 1.2e+03 s in the future >>> MODPOST 1 modules >>> CC /root/lddgeek/Module.mod.o >>> LD [M] /root/lddgeek/Module.ko >>> make[2]: warning: Clock skew detected. Your build may be incomplete. >>> make[1]: warning: Clock skew detected. Your build may be incomplete. >>> make[1]: Leaving directory `/usr/src/linux-3.8.13-bone47' >> >> > You should look more closely at the results. Your module built > successfully and should be usable. The messages regarding "clock skew > detected" are warnings only. They are usually caused when during separate > compilation attempts (usually across system boots) the system clock has > changed. You can usually eliminate those type of warnings by first running > "make clean" then your normal make. > > frank > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/E9bS5pzCamo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- -----Regards & Thanks Shyam Sunder Daram Mobile:- +91 95-6082-143-8 View My Profile @ LinkedIn <http://in.linkedin.com/pub/daram-shyam-sunder/1b/b35/a39> @ Indeed <https://my.indeed.com/r/Daram-Sunder/2982c78c647d7ff1?subfrom=b> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
