Hi,

Have a look here http://processors.wiki.ti.com/index.php/Contiki-6LOWPAN 
(That's similar to what I'm working on now)

Good Luck
Jan

On Saturday, September 27, 2014 at 7:30:02 AM UTC+10, Brian Anderson wrote:
>
> Hi all,
>
> I am interested in setting up a wireless mesh network using a collection 
> of BBBs (and possibly other devices).  Does anyone have experience setting 
> up a wireless mesh network using BBB?
>
> I am not really interested in a so-called "wireless distribution system" 
> that is used to extend an SSID across a wide area using wireless mesh 
> networking.  I am much more interested in setting up a network of 
> cooperating nodes that talk with each other (and to the internet via a 
> gateway/mesh portal connected simultaneously to the internet and the mesh).
>
> In particular, I'm interested in:
>
>   * What distro and kernel are you using?
>       * Ideally this would be with one of RCNs Debian images, but if not, 
> I'm interested in what you might have used.
>       * If you have done something with a Linux based system other than a 
> BBB, I'd like to know about that too.
>   * What mesh routing protocol was used?  Batman, Babel/AHCP, HWMP, OLSR, 
> ...
>   * Steps to configure the mesh network and gateway.
>   * Did you use 802.11s?  If so, presumably using the 802.11s support in 
> the kernel?
>   * WiFi chipset that was used (presumably supporting mesh mode).  SOFTMAC 
> or HARDMAC?
>
> I have researched the topic fairly extensively and can probably set 
> something up via trial and error myself.  Prior to diving into that, I 
> wanted to see if anyone has already done some work with wireless mesh 
> networking and BBB (or something else) and would be willing to share their 
> experience and knowledge!
>
> Thanks in advance.
>
> Cheers,
>
> ba
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to