BBB-eMMC-flasher-debian-8.0-console-armhf-2015-05-31-2gb.img does the same thing.
== On Sunday, June 7, 2015 at 2:59:01 PM UTC-5, Graham wrote: > > > > REGARDING: bone-debian-8.0-console-armhf-2015-05-31-2gb.img > BUG: Does not respond to inputs on serial port tty0 after boot. > > Note: > bone-debian-8.0-lxqt-4gb-armhf-2015-05-31-4gb.img does not have this > problem. > bone-debian-8.0-console-armhf-2015-05-17-2gb.img does not have this > problem. > > > > serial port tty0 boot log (partial): > > [ OK ] Started System Logging Service. > [ OK ] Started Login Service. > Starting Getty on tty1... > [ OK ] Started Getty on tty1. > Starting Serial Getty on ttyS0... > [ OK ] Started Serial Getty on ttyS0. > [ 17.050606] musb-hdrc musb-hdrc.0.auto: otg: usb_otg_register_gadget: > device not registered to otg core > [ OK ] Found device /dev/ttyGS0. > Starting Serial Getty on ttyGS0... > [ OK ] Started Serial Getty on ttyGS0. > [ OK ] Reached target Login Prompts. > [ OK ] Started Generic Board Startup. > [ OK ] Reached target Multi-User System. > [ OK ] Reached target Graphical Interface. > Starting Update UTMP about System Runlevel Changes... > [ OK ] Started Update UTMP about System Runlevel Changes. > > Debian GNU/Linux 8 beaglebone ttyS0 > > BeagleBoard.org Debian Image 2015-05-31 > > Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian > > default username:password is [debian:temppwd] > > The IP Address for eth0 is: 192.168.1.200 > beaglebone login: > > > ================================================================================ > At this point, the unit does not respond to any input on the tty0 > serial port. However I can SSH into the unit just > fine ... > ====== > > login as: root > Debian GNU/Linux 8 > > BeagleBoard.org Debian Image 2015-05-31 > > Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian > > default username:password is [debian:temppwd] > > Last login: Sun Jun 7 19:18:12 2015 from dt7100-pc > root@beaglebone:~# uname -a > Linux beaglebone 3.14.43-ti-r66 #1 SMP PREEMPT Fri May 22 22:31:38 UTC > 2015 armv7l GNU/Linux > root@beaglebone:~# > > > > ===== > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
