Well, on the new Debian releases, P9.19 and P9.20 are mapped to i2c-2. Did you look there?
--- Graham == On Monday, June 29, 2015 at 6:15:09 AM UTC-5, Csangomorfozis wrote: > > Hello everyone! :) I tried to connect an MS5803-14BA pressure sensor to my > Beaglebone Black, and when i test i2c-1 (pins P9_19 and P9_20), the > sensor's address doesn't appear on the memory map. My hookup is the > following MS5803-14BA Beaglebone_Black GND -> P9_1 3.3V > -> P9_3 SDA -> P9_20 SCL -> P9_19 I am > using the latest Debian image on the BBB with the kernel version 3.8.13 My > question is: Did i something wrong on the hookup or on the Beaglebone do i > need to configure something to make the i2c probing correctly? > Theoretically if i connected the sensor properly, then i should see its > address on the Beaglebone. Can give me somebody an advice? Thanks :) > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.