Hi gerald, please check it is a different query. you may not have read my full post...
On Tue, Jun 30, 2015 at 6:54 PM, Gerald Coley <ger...@beagleboard.org> wrote: > I have already responded. You Are missing the CS signal for the top memory > device. > > Gerald > > > On Tue, Jun 30, 2015 at 4:39 AM, mohit hada <mohit....@gmail.com> wrote: > >> Hi Gerald, >> >> Few days back I had started a thread regarding GPMC Parallel NOR boot >> using BeagleBone Black. Finally with the help of the community support and >> specially you, I could come up with a schematic of a cape as attached in >> this post once again just for reference which will be connected to BBB >> expander. Here we want the BBB to boot from NOR Flash U2 and then execute >> our application code which is in U3. The major / first function of the >> application code on U3 will be to program an external FPGA for which we >> plan to use LOGI BONE V2. Programming interface may be a serial interface. >> >> This is a small learning exercise that we want to do for future >> developments with minimum cost. >> >> Now I want to enquire the following:- >> >> 1) If we consider only BBB and LOGI BONE V2, whether BBB will be able to >> program through Serial Interface the Spartan 6 FPGA on LOGI BONE V2? Has >> some one done the same or some idea on this? I can see SPI1 interface >> coming on the expander of BBB. >> >> 2) Can I connect BBB, My Cape and LOGI BONE V2 together? What can be the >> cares that may have to be taken apart from a slightly messy mechanical >> attachment? I can power Logi Bone V2 through a separate supply and may be >> only connect the pins such as ground and Serial Interface for programming >> and remove header where my cape clashes with Logi Bone V2. Any more hints >> or ideas? >> >> Any help in this will be highly appreciated... >> >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Gerald > > ger...@beagleboard.org > http://beagleboard.org/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Mohit Hada (Proprietor) TECHNID SOLUTIONS #7, 3rd Floor. 73, Ashutosh Mukherjee Road. Kolkata - 700025. Contact Details : 08820074382. Web Address: www.technidsolutions.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
