My kirnel bersion is 3.8.13 and I'm using Angstrom Linux sudo is not command in Angstrom
how can i use python ?? LED is not working 2015년 5월 29일 금요일 오전 2시 10분 4초 UTC+9, Miguel Aveiro 님의 말: > Which kernel version are you using (just type: uname -a)? > > If your are using the 3.14 kernel, the GPIO.setup() don't function like it > was supposed to. You need to export the pin first. You should take a look > at config-pin from beaglebone-universal-io ( > https://github.com/cdsteinkuehler/beaglebone-universal-io). > > If you are using the 3.8 kernel, try running with sudo. > > Miguel Zacatei Aveiro > > On 27-05-2015 22:09, 멘지 wrote: > > i'm Newbie in beagleboneblack > > i'm use cloud9 but i want to use python > > So, I try to python tutorial blink LED > > > <https://lh3.googleusercontent.com/-WR_CWXSnaA4/VWZqJIBs6FI/AAAAAAAAFC4/Ffes939RCgQ/s1600/kk.png> > > > nano blink.py <-- command > just blink LED code > > > But , > > > <https://lh3.googleusercontent.com/-h44Y8hc1Y4c/VWZqVgxy00I/AAAAAAAAFDA/_8TfTYUms8o/s1600/d.png> > > when i command > > -- > python blink.py > > LED is not working just stop . > > Can someone help me ?? > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard...@googlegroups.com <javascript:>. > For more options, visit https://groups.google.com/d/optout. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
