Colin, That would be phenomenally helpful! Do you have a scope?
I'm curious if you see any life on pin 28 of the P9 header with and without a cape. I suspect you will see data with the cape (because the DAC on the cape board is talking to the BBB's processor), but nothing without it. I unfortunately don't have a way to "fake" the cape. On Saturday, July 4, 2015 at 9:23:59 AM UTC-6, Colin Bester wrote: > > If it'd help I could run same tests for you with and without audio cape > and test the theory - I am running bone68 but suspect results will be the > same - it'd be good to know if you can see output or not. > > On Saturday, July 4, 2015 at 10:19:59 AM UTC-5, jrb...@colorado.edu wrote: >> >> >> Latest thoughts on this: I think perhaps the problem is that I should not >> expect to see serial data from P9_28 (I2S serial data out) without an >> actual Audio Cape. There are probably I2C (control) and I2S (audio >> content) requirements, such as clocks and so forth, that are required >> before the BBB will output data. >> >> Unfortunately, I know virtually nothing about hardware. >> >> I would just buy an Audio Cape, but I have not seen them in stock >> anywhere for the past month, and there seems to be no indication of when >> they'll be available again. >> >> >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.