On Wed, Jul 29, 2015 at 10:44 AM, <k...@cranehome.info> wrote: > Hello all, > > I purchased a Rev C board a few months ago and set it aside to look at a bit > later. Started working with it more this week and I'm running into things > that seem to be different now. I'm running the eMMC flashed version with > 3.8.13-bone72 kernel. I believe pulled this image from the getting started > wiki. Everything seemed to install ok and I have the basic Debian OS > running on it. However, I noticed that I did not get the normal additional > USB interface on my PC or Mac. Looking into it further I noticed that the > device was no present on the BBB either. The USB serial adapter is present > and useable but nothing else is. The configuration for usb0 is in the file > /etc/network/interfaces and that looks correct. > > modprobe g_ether results in: "ERROR: could not insert 'g_ether': No such > device". The same happens with g_multi. Are these enabled elsewhere? I > don't really miss it mounting the emmc as removable media since that makes > it a pain on Mac but I do miss the ethernet connection over USB. > > lsmod shows: > > Module Size Used by > > g_serial 13167 2 > > libcomposite 15028 1 g_serial > > omap_rng 4062 0 > > mt7601Usta 458758 0
Well... unload g_serial.. Otherwise g_multi/g_ether won't load.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.