Here is the serial boot log *U-Boot SPL 2014.10 (Oct 20 2014 - 20:57:40)* *spl_register_fat_device: fat register err - -1* *spl_register_fat_device: fat register err - -1* *spl_load_image_fat: error reading image u-boot.img, err - -1* *spl: ext4fs_open failed* *spl_load_image_ext_os: error reading image args, err - 0*
2015-08-25 15:33 GMT+02:00 Robert Nelson <robertcnel...@gmail.com>: > > > On Tue, Aug 25, 2015 at 8:28 AM, matthieu claire <mclaire....@gmail.com> > wrote: > >> Hi, >> >> Sorry I was quite busy but I have finally been able to compile the kernel >> 4.1 on opensuse 13.2 running on the BBB but I'm not able to boot on it >> --> nothing displays on the screen >> --> board is not showing on the network >> --> if I check /var/log/messages when I boot on the Debian (eMMC) there >> is no log, I saw only the latest successful boot on the old >> kernel 3.16.7-11-default >> >> To summarise: >> >> I copied the https://github.com/beagleboard/linux/tree/4.1 in the /home/ >> folder and execute the following commands. >> >> >> *linux:/home/linux # make bb.org_defconfig* >> >> *linux:/home/linux # make -j4* >> >> *linux:/home/linux # make uImage dtbs LOADADDR=0x80008000 -j4* >> >> *linux:/home/linux # make modules -j4* >> >> *linux:/home/linux # make modules_install* >> *linux:/home/linux # make install* >> >> See attached for your reference the logs for thoses commands >> --> several modules can't be installed but I think it's normal >> considering the configuration >> >> Then I copy to /boot folder */home/linux/arch/arm/boot/uImage* rename >> *uImage_4.1.6* >> copy */home/linux/**arch/arm/boot/dts/am335x-boneblack.dtb to >> /boot/dtb/ * >> and create the symlink for >> >> - zImage >> - u-boot.img >> - initrd >> >> see below >> >> [image: Images intégrées 1] >> >> The good news is that I'm able to reboot on my old kernel if I change the >> symlinks to point to the 3.16.7 versions. >> >> I'm probably missing a step to configure the boot, if you have an idea. >> > > yeah... a 'serial' boot log is always useful, instead of just guessing > what's happening at bootup. ;) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.