WOW, it loaded. dmesg says so any way. The echo test > /dev/ttyO1...ttyS1 does not fail, but the output is not showing up in my terminal window. Using another BB and a debug cable does send data to UART0.
Do I need to apply this change? http://www.berriman.co.uk/beaglebone-black-with-rs232-cape/ M On Tuesday, August 25, 2015 at 1:55:44 PM UTC-7, RobertCNelson wrote: > > On Tue, Aug 25, 2015 at 3:51 PM, Robert Nelson <robert...@gmail.com > <javascript:>> wrote: > > On Tue, Aug 25, 2015 at 3:26 PM, <michael...@mac.com <javascript:>> > wrote: > >> Robert, > >> I just bought a Circuit Co RS-232 cape. It is revision B1. Does this > >> install work for that cape or do I need to do something different? I > am > >> using a very recent Debian installation. Everything works great except > for > >> this cape! > > > > The jessie lxqt image's should work out of the box with that.. > > > > dmesg | grep bone > > Oh wait, B1 doesn't have eeprom, so we can't detect it... > > Depending on what jumper you have it set for: > > /boot/uEnv.txt: > > cape_enable=bone_capemgr.enable_partno=BB-UART0 > cape_enable=bone_capemgr.enable_partno=BB-UART1 > cape_enable=bone_capemgr.enable_partno=BB-UART2 > cape_enable=bone_capemgr.enable_partno=BB-UART4 #hdmi must be disabled > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.