My LCD is still OFF Now I'm sure I'm loading the am335x-boneblack-emmc-overlay.dtb before starting the kernel (see serial log below)
*UBOOT SERIAL LOG * ## Executing script at 82000000 this is a test fdtfile=dtb/am335x-boneblack-emmc-overlay.dtb Done switch to partitions #0, OK mmc0 is current device 8261808 bytes read in 541 ms (14.6 MiB/s) 6101876 bytes read in 399 ms (14.6 MiB/s) 55700 bytes read in 61 ms (891.6 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x7e10b0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 88010993 Starting kernel ... I cheked the file size linux:~ # ls -l /boot/dtb/ | fgrep 55700 -rw-r--r-- 1 root root 55700 Aug 26 09:04 am335x-boneblack-emmc-overlay.dtb The module is OK [ 49.781865] bone_capemgr bone_capemgr: part_number 'BB-BONE-LCD7-01', version '00A3' [ 49.781909] bone_capemgr bone_capemgr: slot #4: override [ 49.781926] bone_capemgr bone_capemgr: Using override eeprom data at slot 4 [ 49.781944] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A3,Override Manuf,BB-BONE-LCD7-01' [ 49.952336] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-BONE-LCD7-01-00A3.dtbo' loaded; overlay id #0 The X server starts without issue see Xorg.0.log in previous email And lightdm is running *linux:~ # ps -ef | fgrep lightdm* *root 646 1 0 14:47 ? 00:00:00 /usr/sbin/lightdm* *root 674 646 0 14:47 tty7 00:00:00 /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch* *root 781 646 0 14:47 ? 00:00:00 lightdm --session-child 16 19* *lightdm 791 1 0 14:47 ? 00:00:00 /usr/lib/systemd/systemd --user* *lightdm 792 791 0 14:47 ? 00:00:00 (sd-pam)* *lightdm 793 781 0 14:47 ? 00:00:02 /usr/sbin/lightdm-gtk-greeter* *lightdm 800 1 0 14:47 ? 00:00:00 /bin/dbus-launch --autolaunch 2239aafda63c4be8976a02efb8f8119e --binary-syntax --close-stderr* *lightdm 801 1 0 14:47 ? 00:00:00 /bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session* *lightdm 803 1 0 14:47 ? 00:00:00 /usr/lib/at-spi2/at-spi-bus-launcher* *lightdm 809 803 0 14:47 ? 00:00:00 /bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3* *lightdm 816 1 0 14:47 ? 00:00:00 /usr/lib/at-spi2/at-spi2-registryd --use-gnome-session* *root 1082 646 0 14:47 ? 00:00:00 lightdm --session-child 12 19* *root 1655 1549 66 14:57 pts/0 00:00:00 grep -F --color=auto lightdm* Matthieu CLAIRE ZEPHYR AUDIO *Ingénieur R&D / Design & Software Engineer* http://www.zephyr-audio.com +33 623965133 2015-09-02 11:16 GMT+02:00 matthieu claire <matth...@zephyr-audio.com>: > Thank you William for the link, I will try this later. > > In between I found if I load the module in the /etc/init.d/boot.local the > module is loaded 2-3s before X server starts > So now X found the device /dev/fb0 (see Xorg.0.log below) > > But unfortunately I still have NOTHING on the display, it's really > frustrating. > > The login manager lightdm process is running so I should see it on the > screen. > After a while the LCD backlight turns OFF, when I touch the screen it > turns back ON so I guess it's working. > > I'm using the fdt file am335x-boneblack-emmc-overlay.dtb (but I didn't > find how to check this really happeing since this parameter are loaded > after the auto-boot) > I'm loading the module BB-BONE-LCD7-01-00A3.dtbo succesfully > > So I tried to compare the Xorg.0.log between the opensuse and the debian > which is running without issue on the eMMc with the LCD 7" 4D-CAPE-70T > (wile using the same xorg.conf) > > I found several differences: > *On debian * > II) FBDEV(0): hardware: (video memory: 750kB) > *while on opensuse* > *II) FBDEV(0): hardware: (video memory: 2250kB)* > > --> I tried to override this parameter with the parameter *VideoRam 750* > in the device section of my xorg.conf but It has no impact* the log is > still the same* > > *On debian I have several built-in extensions* > [ 13.488] (==) RandR enabled > [ 13.490] (II) Initializing built-in extension Generic Event Extension > [ 13.490] (II) Initializing built-in extension SHAPE > [ 13.491] (II) Initializing built-in extension MIT-SHM > [ 13.491] (II) Initializing built-in extension XInputExtension > [ 13.491] (II) Initializing built-in extension XTEST > [ 13.492] (II) Initializing built-in extension BIG-REQUESTS > [ 13.492] (II) Initializing built-in extension SYNC > [ 13.492] (II) Initializing built-in extension XKEYBOARD > [ 13.492] (II) Initializing built-in extension XC-MISC > [ 13.492] (II) Initializing built-in extension SECURITY > [ 13.493] (II) Initializing built-in extension XINERAMA > [ 13.494] (II) Initializing built-in extension XFIXES > [ 13.494] (II) Initializing built-in extension RENDER > [ 13.495] (II) Initializing built-in extension RANDR > [ 13.495] (II) Initializing built-in extension COMPOSITE > [ 13.495] (II) Initializing built-in extension DAMAGE > [ 13.497] (II) SELinux: Disabled on system > [ 13.751] (II) AIGLX: Screen 0 is not DRI2 capable > *while on opensuse I have none* > *[ 52.716] (==) RandR enabled* > *[ 52.862] (II) AIGLX: Screen 0 is not DRI2 capable* > > *On Debian tps65217 is identified* > (II) Using input driver 'evdev' for 'tps65217_pwr_but' > [ 15.134] (**) tps65217_pwr_but: always reports core events > [ 15.134] (**) evdev: tps65217_pwr_but: Device: "/dev/input/event0" > [ 15.134] (--) evdev: tps65217_pwr_but: Vendor 0 Product 0 > [ 15.134] (--) evdev: tps65217_pwr_but: Found keys > [ 15.134] (II) evdev: tps65217_pwr_but: Configuring as keyboard > [ 15.134] (**) Option "config_info" > "udev:/sys/devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0/event0" > [ 15.141] (II) XINPUT: Adding extended input device "tps65217_pwr_but" > (type: KEYBOARD, id 6) > *while on opensuse I have gpio_keys* > * (II) Using input driver 'evdev' for 'gpio_keys'* > *[ 53.895] (**) gpio_keys: always reports core events* > *[ 53.895] (**) evdev: gpio_keys: Device: "/dev/input/event0"* > *[ 53.896] (--) evdev: gpio_keys: Vendor 0x1 Product 0x1* > *[ 53.896] (--) evdev: gpio_keys: Found keys* > *[ 53.896] (II) evdev: gpio_keys: Configuring as keyboard* > *[ 53.896] (**) Option "config_info" > "udev:/sys/devices/platform/gpio_keys/input/input0/event0"* > *[ 53.896] (II) XINPUT: Adding extended input device "gpio_keys" (type: > KEYBOARD, id 6)* > > > *linux:~ # cat /var/log/Xorg.0.log* > *[ 52.436]* > *X.Org X Server 1.16.1* > *Release Date: 2014-09-21* > *[ 52.436] X Protocol Version 11, Revision 0* > *[ 52.436] Build Operating System: openSUSE SUSE LINUX* > *[ 52.436] Current Operating System: Linux linux.site 4.1.6 #1 SMP > PREEMPT Sun Aug 23 16:43:56 UTC 2015 armv7l* > *[ 52.436] Kernel command line: > root=/dev/disk/by-id/mmc-SL16G_0x28cf527e-part2 loader=uboot > disk=/dev/disk/by-id/mmc-SL16G_0x28cf527e plymouth.enable=0 console=ttyO0* > *[ 52.437] Build Date: 12 June 2015 07:53:26PM* > *[ 52.437]* > *[ 52.437] Current version of pixman: 0.32.6* > *[ 52.437] Before reporting problems, check http://wiki.x.org > <http://wiki.x.org>* > * to make sure that you have the latest version.* > *[ 52.437] Markers: (--) probed, (**) from config file, (==) default > setting,* > * (++) from command line, (!!) notice, (II) informational,* > * (WW) warning, (EE) error, (NI) not implemented, (??) unknown.* > *[ 52.447] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 2 > 08:09:27 2015* > *[ 52.462] (==) Using config file: "/etc/X11/xorg.conf"* > *[ 52.462] (==) Using config directory: "/etc/X11/xorg.conf.d"* > *[ 52.462] (==) Using system config directory > "/usr/share/X11/xorg.conf.d"* > *[ 52.465] (==) ServerLayout "Builtin Default Layout"* > *[ 52.465] (**) |-->Screen "Builtin Default fbdev Screen 0" (0)* > *[ 52.465] (**) | |-->Monitor "Builtin Default Monitor"* > *[ 52.466] (**) | |-->Device "Builtin Default fbdev Device 0"* > *[ 52.466] (==) Automatically adding devices* > *[ 52.466] (==) Automatically enabling devices* > *[ 52.466] (==) Automatically adding GPU devices* > *[ 52.491] (WW) The directory "/usr/share/fonts/misc/sgi" does not > exist.* > *[ 52.491] Entry deleted from font path.* > *[ 52.491] (==) FontPath set to:* > * /usr/share/fonts/misc:unscaled,* > * /usr/share/fonts/Type1/,* > * /usr/share/fonts/100dpi:unscaled,* > * /usr/share/fonts/75dpi:unscaled,* > * /usr/share/fonts/ghostscript/,* > * /usr/share/fonts/cyrillic:unscaled,* > * /usr/share/fonts/truetype/,* > * built-ins* > *[ 52.491] (==) ModulePath set to "/usr/lib/xorg/modules"* > *[ 52.491] (II) The server relies on udev to provide the list of input > devices.* > * If no devices become available, reconfigure udev or disable > AutoAddDevices.* > *[ 52.492] (II) Loader magic: 0x1dbe80* > *[ 52.492] (II) Module ABI versions:* > *[ 52.492] X.Org ANSI C Emulation: 0.4* > *[ 52.492] X.Org Video Driver: 18.0* > *[ 52.492] X.Org XInput driver : 21.0* > *[ 52.492] X.Org Server Extension : 8.0* > *[ 52.493] (II) xfree86: Adding drm device (/dev/dri/card0)* > *[ 52.494] (II) no primary bus or device found* > *[ 52.495] falling back to > /sys/devices/platform/ocp/4830e000.lcdc/drm/card0* > *[ 52.495] (II) LoadModule: "glx"* > *[ 52.517] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so* > *[ 52.608] (II) Module glx: vendor="X.Org Foundation"* > *[ 52.609] compiled for 1.16.1, module version = 1.0.0* > *[ 52.609] ABI class: X.Org Server Extension, version 8.0* > *[ 52.609] (==) AIGLX enabled* > *[ 52.609] (II) LoadModule: "fbdev"* > *[ 52.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so* > *[ 52.621] (II) Module fbdev: vendor="X.Org Foundation"* > *[ 52.622] compiled for 1.16.1, module version = 0.4.4* > *[ 52.622] Module class: X.Org Video Driver* > *[ 52.622] ABI class: X.Org Video Driver, version 18.0* > *[ 52.622] (II) FBDEV: driver for framebuffer: fbdev* > *[ 52.622] (++) using VT number 7* > > *[ 52.630] (WW) Falling back to old probe method for fbdev* > *[ 52.630] (II) Loading sub module "fbdevhw"* > *[ 52.630] (II) LoadModule: "fbdevhw"* > *[ 52.631] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so* > *[ 52.632] (II) Module fbdevhw: vendor="X.Org Foundation"* > *[ 52.632] compiled for 1.16.1, module version = 0.0.2* > *[ 52.632] ABI class: X.Org Video Driver, version 18.0* > *[ 52.633] (II) FBDEV(0): using default device* > *[ 52.633] (II) FBDEV(0): Creating default Display subsection in Screen > section* > * "Builtin Default fbdev Screen 0" for depth/fbbpp 16/16* > *[ 52.633] (**) FBDEV(0): Depth 16, (--) framebuffer bpp 16* > *[ 52.633] (==) FBDEV(0): RGB weight 565* > *[ 52.633] (==) FBDEV(0): Default visual is TrueColor* > *[ 52.634] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)* > *[ 52.634] (II) FBDEV(0): hardware: (video memory: 2250kB)* > *[ 52.634] (II) FBDEV(0): checking modes against framebuffer device...* > *[ 52.634] (II) FBDEV(0): checking modes against monitor...* > *[ 52.634] (--) FBDEV(0): Virtual size is 800x480 (pitch 800)* > *[ 52.634] (**) FBDEV(0): Built-in mode "current"* > *[ 52.634] (==) FBDEV(0): DPI set to (96, 96)* > *[ 52.634] (II) Loading sub module "fb"* > *[ 52.634] (II) LoadModule: "fb"* > *[ 52.635] (II) Loading /usr/lib/xorg/modules/libfb.so* > *[ 52.646] (II) Module fb: vendor="X.Org Foundation"* > *[ 52.646] compiled for 1.16.1, module version = 1.0.0* > *[ 52.646] ABI class: X.Org ANSI C Emulation, version 0.4* > *[ 52.646] (**) FBDEV(0): using shadow framebuffer* > *[ 52.646] (II) Loading sub module "shadow"* > *[ 52.646] (II) LoadModule: "shadow"* > *[ 52.647] (II) Loading /usr/lib/xorg/modules/libshadow.so* > *[ 52.661] (II) Module shadow: vendor="X.Org Foundation"* > *[ 52.661] compiled for 1.16.1, module version = 1.1.0* > *[ 52.661] ABI class: X.Org ANSI C Emulation, version 0.4* > *[ 52.711] (==) FBDEV(0): Backing store enabled* > *[ 52.712] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.712] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.712] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.712] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.712] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.713] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.714] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.715] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.716] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.716] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.716] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.716] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument* > *[ 52.716] (==) FBDEV(0): DPMS enabled* > *[ 52.716] (==) RandR enabled* > *[ 52.862] (II) AIGLX: Screen 0 is not DRI2 capable* > *[ 52.862] (EE) AIGLX: reverting to software rendering* > *[ 53.362] (II) AIGLX: Loaded and initialized swrast* > *[ 53.365] (II) GLX: Initialized DRISWRAST GL provider for screen 0* > *[ 53.888] (II) config/udev: Adding input device gpio_keys > (/dev/input/event0)* > *[ 53.888] (**) gpio_keys: Applying InputClass "evdev keyboard > catchall"* > *[ 53.888] (**) gpio_keys: Applying InputClass "system-keyboard"* > *[ 53.889] (**) gpio_keys: Applying InputClass "evdev keyboard > catchall"* > *[ 53.889] (II) LoadModule: "evdev"* > *[ 53.889] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so* > *[ 53.894] (II) Module evdev: vendor="X.Org Foundation"* > *[ 53.894] compiled for 1.16.1, module version = 2.9.0* > *[ 53.895] Module class: X.Org XInput Driver* > *[ 53.895] ABI class: X.Org XInput driver, version 21.0* > *[ 53.895] (II) Using input driver 'evdev' for 'gpio_keys'* > *[ 53.895] (**) gpio_keys: always reports core events* > *[ 53.895] (**) evdev: gpio_keys: Device: "/dev/input/event0"* > *[ 53.896] (--) evdev: gpio_keys: Vendor 0x1 Product 0x1* > *[ 53.896] (--) evdev: gpio_keys: Found keys* > *[ 53.896] (II) evdev: gpio_keys: Configuring as keyboard* > *[ 53.896] (**) Option "config_info" > "udev:/sys/devices/platform/gpio_keys/input/input0/event0"* > *[ 53.896] (II) XINPUT: Adding extended input device "gpio_keys" (type: > KEYBOARD, id 6)* > *[ 53.896] (**) Option "xkb_rules" "evdev"* > *[ 53.896] (**) Option "xkb_model" "pc104"* > *[ 53.896] (**) Option "xkb_layout" "us"* > *[ 54.045] (II) config/udev: Adding input device ti-tsc > (/dev/input/event1)* > *[ 54.046] (**) ti-tsc: Applying InputClass "evdev touchscreen > catchall"* > *[ 54.046] (**) ti-tsc: Applying InputClass "evdev touchscreen > catchall"* > *[ 54.046] (II) Using input driver 'evdev' for 'ti-tsc'* > *[ 54.046] (**) ti-tsc: always reports core events* > *[ 54.046] (**) evdev: ti-tsc: Device: "/dev/input/event1"* > *[ 54.046] (--) evdev: ti-tsc: Vendor 0 Product 0* > *[ 54.047] (--) evdev: ti-tsc: Found absolute axes* > *[ 54.047] (--) evdev: ti-tsc: Found x and y absolute axes* > *[ 54.047] (--) evdev: ti-tsc: Found absolute touchscreen* > *[ 54.047] (II) evdev: ti-tsc: Configuring as touchscreen* > *[ 54.047] (**) evdev: ti-tsc: YAxisMapping: buttons 4 and 5* > *[ 54.047] (**) evdev: ti-tsc: EmulateWheelButton: 4, > EmulateWheelInertia: 10, EmulateWheelTimeout: 200* > *[ 54.047] (**) Option "config_info" > "udev:/sys/devices/platform/ocp/44e0d000.tscadc/TI-am335x-tsc/input/input1/event1"* > *[ 54.047] (II) XINPUT: Adding extended input device "ti-tsc" (type: > TOUCHSCREEN, id 7)* > *[ 54.048] (II) evdev: ti-tsc: initialized for absolute axes.* > *[ 54.049] (**) ti-tsc: (accel) keeping acceleration scheme 1* > *[ 54.049] (**) ti-tsc: (accel) acceleration profile 0* > *[ 54.049] (**) ti-tsc: (accel) acceleration factor: 2.000* > *[ 54.049] (**) ti-tsc: (accel) acceleration threshold: 4* > *[ 54.052] (II) config/udev: Adding input device ti-tsc > (/dev/input/mouse0)* > *[ 54.052] (II) No input driver specified, ignoring this device.* > *[ 54.052] (II) This device may have been added with another device > file.* > > > > Matthieu CLAIRE > ZEPHYR AUDIO > *Ingénieur R&D / Design & Software Engineer* > http://www.zephyr-audio.com > +33 623965133 > > 2015-09-01 23:52 GMT+02:00 William Hermans <yyrk...@gmail.com>: > >> >> http://www.linuxforums.org/forum/red-hat-fedora-linux/192512-how-can-i-add-binary-initramfs-image.html >> >> Seems to be a decent explanation of how to do just what you want. I've >> never tested this personally though . . . >> >> On Tue, Sep 1, 2015 at 2:40 PM, matthieu claire <mclaire....@gmail.com> >> wrote: >> >>> My bad the /dev/fb0 is available after loading the module. >>> >>> I really need to find a way to shove the dtbo inside the initramfs. >>> >>> >>> 2015-09-01 22:24 GMT+02:00 matthieu claire <mclaire....@gmail.com>: >>> >>>> After loading the module when I connect in ssh I still not see the >>>> device /dev/fb0 >>>> Is it normal? >>>> >>>> >>>> Le mardi 1 septembre 2015, matthieu claire <mclaire....@gmail.com> a >>>> écrit : >>>> >>>>> Do you know how i can do that with dracut? >>>>> >>>>> I don't know why on opensuse I can't use the mkinitrd >>>>> >>>>> Le mardi 1 septembre 2015, Robert Nelson <robertcnel...@gmail.com> a >>>>> écrit : >>>>> >>>>>> Looks like we have a race going (based on timestamps): >>>>>> >>>>>> > [ 54.444590] bone_capemgr bone_capemgr: part_number >>>>>> 'BB-BONE-LCD7-01', >>>>>> > version '00A3' >>>>>> > [ 54.444632] bone_capemgr bone_capemgr: slot #4: override >>>>>> > [ 54.444650] bone_capemgr bone_capemgr: Using override eeprom >>>>>> data at slot >>>>>> > 4 >>>>>> > [ 54.444668] bone_capemgr bone_capemgr: slot #4: 'Override Board >>>>>> > Name,00A3,Override Manuf,BB-BONE-LCD7-01' >>>>>> > [ 54.536700] bone_capemgr bone_capemgr: slot #4: dtbo >>>>>> > 'BB-BONE-LCD7-01-00A3.dtbo' loaded; overlay id #0 >>>>>> >>>>>> >>>>>> > Release Date: 2014-09-21 >>>>>> > [ 50.858] X Protocol Version 11, Revision 0 >>>>>> > [ 50.858] Build Operating System: openSUSE SUSE LINUX >>>>>> > [ 50.858] Current Operating System: Linux linux.site 4.1.6 #1 >>>>>> SMP PREEMPT >>>>>> >>>>>> X-Server is loading 4 seconds before the cape get's loaded... can you >>>>>> shove the *.dtbo into the initramfs? >>>>>> >>>>>> Regards, >>>>>> >>>>>> >>>>>> -- >>>>>> Robert Nelson >>>>>> https://rcn-ee.com/ >>>>>> >>>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/EMpqCAtP3dw/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.