I skipped ahead to 4.1.5-ti-r10 but I can verify that it definitely fixed my problem, same as OP's. This problem was driving me nuts for a few days until I finally found this post.
Thanks RCN On Tuesday, June 2, 2015 at 11:45:34 AM UTC-4, RobertCNelson wrote: > > On Tue, Jun 2, 2015 at 10:19 AM, <pule...@gmail.com <javascript:>> > wrote: > > Hello. > > > > I'm trying to get BBB Rev C working with USB sound card. Everything > works > > fine under kernel 3.8. But under 3.14 sound either completely stuck > right > > after the boot (this happens most of the time) or it works for some time > and > > then stuck. I don't know how to debug this issue. Here are usbmon traces > > taken when I issue "paplay /usr/share/sounds/alsa/Front_Center.wav" > command: > > If usb worked with 3.8 but fails with 3.14, it's probally: > > CONFIG_USB_TI_CPPI41_DMA=y > > So rebuild, with: > > # CONFIG_USB_TI_CPPI41_DMA is not set > CONFIG_MUSB_PIO_ONLY=y > > ps, you can also give 4.1.0-rc6 a try: > > sudo apt-get update > sudo apt-get install linux-image-4.1.0-rc6-bone6 > sudo reboot > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
