Hello All, does anyone know what the following dmesg output lines could mean: [ 5973.943655] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 5973.943962] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s I suspect it is some error happening on the hub port #1 but could not find out anywhere what the status and change codes are. dmesg output is attached. My Beaglebone Black USB host is connected to a commercial hub having 2 FTDI USB-to-232 cables (port#1 and #2) downstream. Thank you
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[ 0.681725] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN' [ 0.681888] bone-capemgr bone_capemgr.9: Skipping loading of disabled cape with part# BB-BONELT-HDMI [ 0.681902] bone-capemgr bone_capemgr.9: Skipping loading of disabled cape with part# BB-BONELT-HDMIN [ 0.682043] bone-capemgr bone_capemgr.9: initialized OK. [ 0.683534] OneNAND driver initializing [ 0.684388] usbcore: registered new interface driver cdc_ether [ 0.684438] usbcore: registered new interface driver rndis_host [ 0.684546] usbcore: registered new interface driver cdc_ncm [ 0.684876] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.684892] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.684906] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.684938] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0' [ 0.684956] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree [ 0.685209] bone-capemgr bone_capemgr.9: slot #4: #2 overlays [ 0.685790] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays. [ 0.685809] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.686067] usbcore: registered new interface driver cdc_acm [ 0.686078] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.686085] Initializing USB Mass Storage driver... [ 0.686151] usbcore: registered new interface driver usb-storage [ 0.686158] USB Mass Storage support registered. [ 0.686293] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.686533] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 0.686550] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:480 dsps_musb_init: OK [ 0.686577] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.686588] musb-hdrc: MHDRC RTL version 2.0 [ 0.686596] musb-hdrc: setup fifo_mode 4 [ 0.686611] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.686704] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 0.686715] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 0.687292] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 0.687309] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:480 dsps_musb_init: OK [ 0.687332] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.687342] musb-hdrc: MHDRC RTL version 2.0 [ 0.687349] musb-hdrc: setup fifo_mode 4 [ 0.687360] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.687434] musb-hdrc musb-hdrc.1.auto: *** mode=1 [ 0.687445] musb-hdrc musb-hdrc.1.auto: *** power=250 [ 0.687456] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 0.687670] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 0.687701] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup [ 0.687769] usb usb1: default language 0x0409 [ 0.687801] usb usb1: udev 1, busnum 1, minor = 0 [ 0.687812] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.687823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.687833] usb usb1: Product: MUSB HDRC host driver [ 0.687842] usb usb1: Manufacturer: Linux 3.8.13-bone69 musb-hcd [ 0.687851] usb usb1: SerialNumber: musb-hdrc.1.auto [ 0.688251] usb usb1: usb_probe_device [ 0.688267] usb usb1: configuration #1 chosen from 1 choice [ 0.688306] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.688408] hub 1-0:1.0: usb_probe_interface [ 0.688419] hub 1-0:1.0: usb_probe_interface - got id [ 0.688435] hub 1-0:1.0: USB hub found [ 0.688459] hub 1-0:1.0: 1 port detected [ 0.688468] hub 1-0:1.0: standalone hub [ 0.688477] hub 1-0:1.0: individual port power switching [ 0.688487] hub 1-0:1.0: no over-current protection [ 0.688495] hub 1-0:1.0: Single TT [ 0.688504] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.688514] hub 1-0:1.0: power on to power good time: 10ms [ 0.688536] hub 1-0:1.0: local power source is good [ 0.688591] hub 1-0:1.0: enabling power on all ports [ 0.689281] mousedev: PS/2 mouse device common for all mice [ 0.690737] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 0.691043] i2c /dev entries driver [ 0.691970] pps_ldisc: PPS line discipline registered [ 0.692056] Driver for 1-wire Dallas network protocol. [ 0.693205] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 0.693612] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-de...@redhat.com [ 0.693648] cpuidle: using governor ladder [ 0.693657] cpuidle: using governor menu [ 0.693900] of_get_named_gpio_flags exited with status 6 [ 0.693910] of_get_named_gpio_flags: can't parse gpios property [ 0.693918] of_get_named_gpio_flags: can't parse gpios property [ 0.693938] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed [ 0.701172] omap_hsmmc mmc.5: Failed to get rstctl; not using any [ 0.701498] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 0.701543] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 0.701698] mmc.5 supply vmmc_aux not found, using dummy regulator [ 0.702030] omap_hsmmc mmc.5: pins are not configured from the driver [ 0.728171] of_get_named_gpio_flags: can't parse gpios property [ 0.728187] of_get_named_gpio_flags: can't parse gpios property [ 0.728195] of_get_named_gpio_flags: can't parse gpios property [ 0.728226] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn [ 0.728289] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn [ 0.728301] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn [ 0.728498] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3 [ 0.728541] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2 [ 0.728881] mmc.11 supply vmmc_aux not found, using dummy regulator [ 0.728959] omap_hsmmc mmc.11: pins are not configured from the driver [ 0.755601] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 0.767282] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 0.774560] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 0.783488] leds-gpio gpio-leds.8: pins are not configured from the driver [ 0.783513] of_get_named_gpio_flags exited with status 53 [ 0.783524] of_get_named_gpio_flags exited with status 54 [ 0.783534] of_get_named_gpio_flags exited with status 55 [ 0.783544] of_get_named_gpio_flags exited with status 56 [ 0.783557] of_get_named_gpio_flags exited with status 53 [ 0.783685] of_get_named_gpio_flags exited with status 54 [ 0.783850] of_get_named_gpio_flags exited with status 55 [ 0.783957] of_get_named_gpio_flags exited with status 56 [ 0.784279] ledtrig-cpu: registered to indicate activity on CPUs [ 0.784526] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 0.784581] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 0.785831] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 0.785911] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 0.785950] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 0.788702] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 0.788752] hub 1-0:1.0: hub_suspend [ 0.788779] usb usb1: bus auto-suspend, wakeup 1 [ 0.789167] usbcore: registered new interface driver usbhid [ 0.789176] usbhid: USB HID core driver [ 0.790000] ashmem: initialized [ 0.790200] logger: created 256K log 'log_main' [ 0.790374] logger: created 256K log 'log_events' [ 0.790652] logger: created 256K log 'log_radio' [ 0.790858] logger: created 256K log 'log_system' [ 0.792878] TCP: cubic registered [ 0.792954] NET: Registered protocol family 10 [ 0.793746] NET: Registered protocol family 17 [ 0.793968] Key type dns_resolver registered [ 0.794155] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.794179] ThumbEE CPU extension supported. [ 0.794206] Registering SWP/SWPB emulation handler [ 0.794909] registered taskstats version 1 [ 0.843245] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 0.843262] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 0.850016] libphy: 4a101000.mdio: probed [ 0.850043] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 0.850214] Detected MACID = 90:59:af:54:e1:03 [ 0.850317] cpsw 4a100000.ethernet: NAPI disabled [ 0.851159] mmc1: BKOPS_EN bit is not set [ 0.852025] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 0.857115] ALSA device list: [ 0.857135] No soundcards found. [ 0.857315] mmc1: new high speed MMC card at address 0001 [ 0.858367] Freeing init memory: 244K [ 0.860084] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 0.861111] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 0.862245] usb usb1: usb wakeup-resume [ 0.862285] usb usb1: usb auto-resume [ 0.862304] hub 1-0:1.0: hub_resume [ 0.862340] hub 1-0:1.0: port 1: status 0101 change 0001 [ 0.862479] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 0.864545] mmcblk0: p1 p2 [ 0.866900] mmcblk0boot1: unknown partition table [ 0.868431] mmcblk0boot0: unknown partition table [ 0.912686] udevd[95]: starting version 175 [ 0.964499] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 0.964553] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 1.069937] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 1.189233] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.189258] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 1.189269] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.189669] usb 1-1: usb_probe_device [ 1.189685] usb 1-1: configuration #1 chosen from 1 choice [ 1.189823] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.189954] hub 1-1:1.0: usb_probe_interface [ 1.189966] hub 1-1:1.0: usb_probe_interface - got id [ 1.189984] hub 1-1:1.0: USB hub found [ 1.190061] hub 1-1:1.0: 4 ports detected [ 1.190072] hub 1-1:1.0: standalone hub [ 1.190080] hub 1-1:1.0: individual port power switching [ 1.190089] hub 1-1:1.0: individual port over-current protection [ 1.190236] hub 1-1:1.0: TT per port [ 1.190249] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.190259] hub 1-1:1.0: power on to power good time: 100ms [ 1.190359] hub 1-1:1.0: local power source is good [ 1.190540] hub 1-1:1.0: enabling power on all ports [ 1.190948] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 1.190979] hub 1-0:1.0: port 1 enable change, status 00000503 [ 1.290927] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 1.290986] hub 1-1:1.0: hub_suspend [ 1.293287] usb 1-1: usb auto-suspend, wakeup 1 [ 1.306252] hub 1-0:1.0: hub_suspend [ 1.306295] usb usb1: bus auto-suspend, wakeup 1 [ 2.136777] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.408219] udevd[323]: starting version 175 [ 4.028061] omap_rng 48310000.rng: base address of priv is -97452032 [ 4.034915] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 5.772282] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.157101] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 11.243019] net eth0: initializing cpsw version 1.12 (0) [ 11.246177] net eth0: phy found : id is : 0x7c0f1 [ 11.246203] libphy: PHY 4a101000.mdio:01 not found [ 11.251249] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 11.269448] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.881572] usb usb1: usb wakeup-resume [ 13.881623] usb usb1: usb auto-resume [ 13.881643] hub 1-0:1.0: hub_resume [ 13.881679] hub 1-0:1.0: port 1: status 0507 change 0004 [ 13.881738] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 13.903826] usb 1-1: usb wakeup-resume [ 13.903904] usb 1-1: finish resume [ 13.904080] hub 1-1:1.0: hub_resume [ 13.904145] hub 1-1:1.0: port 1: status 0101 change 0001 [ 14.007450] hub 1-0:1.0: resume on port 1, status 0 [ 14.007477] hub 1-0:1.0: port 1, status 0507, change 0004, 480 Mb/s [ 14.007497] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 14.007539] hub 1-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 14.007636] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 14.021157] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 14.087568] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc [ 14.101249] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 14.181222] usb 1-1.1: ep0 maxpacket = 8 [ 14.182676] usb 1-1.1: default language 0x0409 [ 14.186611] usb 1-1.1: udev 3, busnum 1, minor = 2 [ 14.186634] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001 [ 14.186647] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 14.186657] usb 1-1.1: Product: TTL232R-3V3 [ 14.186666] usb 1-1.1: Manufacturer: FTDI [ 14.186676] usb 1-1.1: SerialNumber: FTGZJVHT [ 14.187326] usb 1-1.1: usb_probe_device [ 14.187344] usb 1-1.1: configuration #1 chosen from 1 choice [ 14.188226] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 14.303729] usbcore: registered new interface driver usbserial [ 14.306985] usbcore: registered new interface driver usbserial_generic [ 14.309933] usbserial: USB Serial support registered for generic [ 14.322376] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 14.322438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.327511] usbcore: registered new interface driver ftdi_sio [ 14.331408] usbserial: USB Serial support registered for FTDI USB Serial Device [ 14.334161] ftdi_sio 1-1.1:1.0: usb_probe_interface [ 14.334190] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id [ 14.334224] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [ 14.334591] usb 1-1.1: Detected FT232RL [ 14.334604] usb 1-1.1: Number of endpoints 2 [ 14.334614] usb 1-1.1: Endpoint 1 MaxPacketSize 64 [ 14.334624] usb 1-1.1: Endpoint 2 MaxPacketSize 64 [ 14.334633] usb 1-1.1: Setting MaxPacketSize 64 [ 14.336161] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 14.572996] gadget: using random self ethernet address [ 14.581927] usb0: MAC 0e:70:31:3a:a3:70 [ 14.581947] usb0: HOST MAC 90:59:af:54:e1:05 [ 14.585517] gadget: Mass Storage Function, version: 2009/09/11 [ 14.585536] gadget: Number of LUNs=1 [ 14.585557] lun0: LUN: removable file: /dev/mmcblk0p1 [ 14.585667] gadget: Multifunction Composite Gadget [ 14.585691] gadget: g_multi ready [ 14.585732] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 14.586070] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 [ 14.586098] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup [ 14.586167] usb usb2: default language 0x0409 [ 14.586198] usb usb2: udev 1, busnum 2, minor = 128 [ 14.586210] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.586221] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.586230] usb usb2: Product: MUSB HDRC host driver [ 14.586240] usb usb2: Manufacturer: Linux 3.8.13-bone69 musb-hcd [ 14.586249] usb usb2: SerialNumber: musb-hdrc.0.auto [ 14.589218] usb usb2: usb_probe_device [ 14.589240] usb usb2: configuration #1 chosen from 1 choice [ 14.589295] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 14.591965] hub 2-0:1.0: usb_probe_interface [ 14.591983] hub 2-0:1.0: usb_probe_interface - got id [ 14.592007] hub 2-0:1.0: USB hub found [ 14.592049] hub 2-0:1.0: 1 port detected [ 14.592060] hub 2-0:1.0: standalone hub [ 14.592069] hub 2-0:1.0: individual port power switching [ 14.592078] hub 2-0:1.0: no over-current protection [ 14.592086] hub 2-0:1.0: Single TT [ 14.592096] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 14.592106] hub 2-0:1.0: power on to power good time: 10ms [ 14.592129] hub 2-0:1.0: local power source is good [ 14.592195] hub 2-0:1.0: enabling power on all ports [ 14.693024] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 14.693116] hub 2-0:1.0: hub_suspend [ 14.693145] usb usb2: bus auto-suspend, wakeup 1 [ 14.778489] CAUTION: musb: Babble Interrupt Occurred [ 14.832561] CAUTION: musb: Babble Interrupt Occurred [ 14.915627] gadget: high-speed config #1: Multifunction with RNDIS [ 33.463700] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004 [ 33.463955] hub 1-1:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 33.572514] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 33.586207] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 33.652593] usb 1-1.2: new full-speed USB device number 4 using musb-hdrc [ 33.666348] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 33.746254] usb 1-1.2: ep0 maxpacket = 8 [ 33.747921] usb 1-1.2: default language 0x0409 [ 33.752515] usb 1-1.2: udev 4, busnum 1, minor = 3 [ 33.752563] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001 [ 33.752598] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 33.752630] usb 1-1.2: Product: FT232R USB UART [ 33.752659] usb 1-1.2: Manufacturer: FTDI [ 33.752688] usb 1-1.2: SerialNumber: AL008JIU [ 33.756122] usb 1-1.2: usb_probe_device [ 33.756174] usb 1-1.2: configuration #1 chosen from 1 choice [ 33.758240] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 33.761166] ftdi_sio 1-1.2:1.0: usb_probe_interface [ 33.761215] ftdi_sio 1-1.2:1.0: usb_probe_interface - got id [ 33.761292] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [ 33.761667] usb 1-1.2: Detected FT232RL [ 33.761703] usb 1-1.2: Number of endpoints 2 [ 33.761735] usb 1-1.2: Endpoint 1 MaxPacketSize 64 [ 33.761901] usb 1-1.2: Endpoint 2 MaxPacketSize 64 [ 33.761936] usb 1-1.2: Setting MaxPacketSize 64 [ 33.763445] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1 [ 33.768138] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004 [ 5973.943655] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 5973.943962] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 5973.944015] usb 1-1.1: USB disconnect, device number 3 [ 5973.944047] usb 1-1.1: unregistering device [ 5973.944081] usb 1-1.1: unregistering interface 1-1.1:1.0 [ 5973.952877] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [ 5973.953109] ftdi_sio 1-1.1:1.0: device disconnected [ 5973.953325] usb 1-1.1: usb_disable_device nuking all URBs [ 5974.066119] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 5974.079844] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5974.146164] usb 1-1.1: new full-speed USB device number 5 using musb-hdrc [ 5974.159866] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5974.226313] usb 1-1.1: device descriptor read/64, error -32 [ 5974.349329] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5974.415734] usb 1-1.1: device descriptor read/64, error -32 [ 5974.538830] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5974.605131] usb 1-1.1: new full-speed USB device number 6 using musb-hdrc [ 5974.618849] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5974.685222] usb 1-1.1: device descriptor read/64, error -32 [ 5974.808290] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5974.874666] usb 1-1.1: device descriptor read/64, error -32 [ 5974.997766] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5975.064128] usb 1-1.1: new full-speed USB device number 7 using musb-hdrc [ 5975.470292] usb 1-1.1: device not accepting address 7, error -32 [ 5975.491975] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 5975.558296] usb 1-1.1: new full-speed USB device number 8 using musb-hdrc [ 5975.964437] usb 1-1.1: device not accepting address 8, error -32 [ 5975.973086] hub 1-1:1.0: unable to enumerate USB device on port 1 [ 5975.980715] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [76333.527419] usb usb2: usb auto-resume [76333.527449] hub 2-0:1.0: hub_resume [76333.527531] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [76333.527759] hub 2-0:1.0: hub_suspend [76333.527786] usb usb2: bus auto-suspend, wakeup 1 [76333.528040] usb usb2: usb auto-resume [76333.528053] hub 2-0:1.0: hub_resume [76333.528107] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [76333.528147] hub 2-0:1.0: hub_suspend [76333.528163] usb usb2: bus auto-suspend, wakeup 1 [76333.529591] usb usb2: usb auto-resume [76333.529613] hub 2-0:1.0: hub_resume [76333.529688] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [76333.529738] hub 2-0:1.0: hub_suspend [76333.529761] usb usb2: bus auto-suspend, wakeup 1 [76333.529926] usb usb2: usb auto-resume [76333.529939] hub 2-0:1.0: hub_resume [76333.529980] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [76333.530016] hub 2-0:1.0: hub_suspend [76333.530032] usb usb2: bus auto-suspend, wakeup 1 [76407.479702] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [76407.481252] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [76407.589482] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [76414.647692] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [76414.647973] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [76414.757732] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [76414.771389] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [76414.837774] usb 1-1.1: new full-speed USB device number 9 using musb-hdrc [76414.851488] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [76414.931426] usb 1-1.1: ep0 maxpacket = 8 [76414.933132] usb 1-1.1: default language 0x0409 [76414.937282] usb 1-1.1: udev 9, busnum 1, minor = 8 [76414.937327] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001 [76414.937363] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [76414.937395] usb 1-1.1: Product: TTL232R-3V3 [76414.937425] usb 1-1.1: Manufacturer: FTDI [76414.937454] usb 1-1.1: SerialNumber: FTGZJVHT [76414.941455] usb 1-1.1: usb_probe_device [76414.941508] usb 1-1.1: configuration #1 chosen from 1 choice [76414.943247] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [76414.945664] ftdi_sio 1-1.1:1.0: usb_probe_interface [76414.945716] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id [76414.945792] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [76414.946169] usb 1-1.1: Detected FT232RL [76414.946205] usb 1-1.1: Number of endpoints 2 [76414.946238] usb 1-1.1: Endpoint 1 MaxPacketSize 64 [76414.946269] usb 1-1.1: Endpoint 2 MaxPacketSize 64 [76414.946299] usb 1-1.1: Setting MaxPacketSize 64 [76414.948156] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [76414.951868] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [77618.043321] usb usb2: usb auto-resume [77618.043350] hub 2-0:1.0: hub_resume [77618.043433] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77618.043719] hub 2-0:1.0: hub_suspend [77618.043747] usb usb2: bus auto-suspend, wakeup 1 [77618.043933] usb usb2: usb auto-resume [77618.043947] hub 2-0:1.0: hub_resume [77618.043997] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77618.044035] hub 2-0:1.0: hub_suspend [77618.044052] usb usb2: bus auto-suspend, wakeup 1 [77618.044281] usb usb2: usb auto-resume [77618.044295] hub 2-0:1.0: hub_resume [77618.044338] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77618.044375] hub 2-0:1.0: hub_suspend [77618.044391] usb usb2: bus auto-suspend, wakeup 1 [77618.044536] usb usb2: usb auto-resume [77618.044548] hub 2-0:1.0: hub_resume [77618.044585] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77618.044617] hub 2-0:1.0: hub_suspend [77618.044633] usb usb2: bus auto-suspend, wakeup 1 [77707.521136] Netfilter messages via NETLINK v0.30. [77789.082106] usb usb2: usb auto-resume [77789.082135] hub 2-0:1.0: hub_resume [77789.082215] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77789.083010] hub 2-0:1.0: hub_suspend [77789.083043] usb usb2: bus auto-suspend, wakeup 1 [77916.743992] usb usb2: usb auto-resume [77916.744020] hub 2-0:1.0: hub_resume [77916.744103] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77916.744169] hub 2-0:1.0: hub_suspend [77916.744194] usb usb2: bus auto-suspend, wakeup 1 [77948.820253] usb usb2: usb auto-resume [77948.820282] hub 2-0:1.0: hub_resume [77948.821008] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [77948.821111] hub 2-0:1.0: hub_suspend [77948.821140] usb usb2: bus auto-suspend, wakeup 1 [78090.679956] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [78090.680239] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [78090.680260] usb 1-1.1: USB disconnect, device number 9 [78090.680271] usb 1-1.1: unregistering device [78090.680283] usb 1-1.1: unregistering interface 1-1.1:1.0 [78090.684182] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [78090.684281] ftdi_sio 1-1.1:1.0: device disconnected [78090.684377] usb 1-1.1: usb_disable_device nuking all URBs [78090.794377] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [78090.808018] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78090.874451] usb 1-1.1: new full-speed USB device number 10 using musb-hdrc [78090.888061] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78090.954427] usb 1-1.1: device descriptor read/64, error -32 [78091.077768] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78091.143901] usb 1-1.1: device descriptor read/64, error -32 [78091.267513] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78091.333584] usb 1-1.1: new full-speed USB device number 11 using musb-hdrc [78091.347065] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78091.413461] usb 1-1.1: device descriptor read/64, error -32 [78091.536917] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78091.602935] usb 1-1.1: device descriptor read/64, error -32 [78091.726006] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78091.792387] usb 1-1.1: new full-speed USB device number 12 using musb-hdrc [78092.198644] usb 1-1.1: device not accepting address 12, error -32 [78092.225960] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [78092.292403] usb 1-1.1: new full-speed USB device number 13 using musb-hdrc [78092.698620] usb 1-1.1: device not accepting address 13, error -32 [78092.714481] hub 1-1:1.0: unable to enumerate USB device on port 1 [78092.744117] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82312.888221] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004 [82312.889311] hub 1-1:1.0: port 2, status 0100, change 0001, 12 Mb/s [82312.889366] usb 1-1.2: USB disconnect, device number 4 [82312.889400] usb 1-1.2: unregistering device [82312.889434] usb 1-1.2: unregistering interface 1-1.2:1.0 [82312.898719] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 [82312.898976] ftdi_sio 1-1.2:1.0: device disconnected [82312.899209] usb 1-1.2: usb_disable_device nuking all URBs [82313.015552] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [82313.015683] hub 1-1:1.0: hub_suspend [82313.020840] usb 1-1: usb auto-suspend, wakeup 1 [82313.033084] hub 1-0:1.0: hub_suspend [82313.033201] usb usb1: bus auto-suspend, wakeup 1 [82322.212955] musb_stage0_irq 496: bogus host RESUME (b_peripheral) [82337.575577] usb usb1: usb auto-resume [82337.575668] hub 1-0:1.0: hub_resume [82337.576401] hub 1-0:1.0: port 1: status 0507 change 0000 [82337.576509] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82337.578774] usb 1-1: usb auto-resume [82337.629403] usb 1-1: finish resume [82342.629845] usb 1-1: lsusb timed out on ep0in len=0/2 [82342.629902] usb 1-1: retry with reset-resume [82342.686487] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [82342.739247] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [82342.792424] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [82342.859974] hub 1-1:1.0: hub_reset_resume [82342.860267] hub 1-1:1.0: enabling power on all ports [82342.965997] hub 1-1:1.0: port 2: status 0101 change 0001 [82343.071144] hub 1-1:1.0: state 7 ports 4 chg 0004 evt 0000 [82343.071406] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [82343.085057] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [82343.112168] usb usb2: usb auto-resume [82343.112229] hub 2-0:1.0: hub_resume [82343.151443] usb 1-1.2: new full-speed USB device number 14 using musb-hdrc [82343.166955] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [82343.246875] usb 1-1.2: ep0 maxpacket = 8 [82343.251439] usb 1-1.2: default language 0x0409 [82343.256830] usb 1-1.2: udev 14, busnum 1, minor = 13 [82343.256880] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001 [82343.256917] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [82343.256950] usb 1-1.2: Product: FT232R USB UART [82343.256980] usb 1-1.2: Manufacturer: FTDI [82343.257010] usb 1-1.2: SerialNumber: AL008JIU [82343.260663] usb 1-1.2: usb_probe_device [82343.260718] usb 1-1.2: configuration #1 chosen from 1 choice [82343.264694] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [82343.267951] ftdi_sio 1-1.2:1.0: usb_probe_interface [82343.268002] ftdi_sio 1-1.2:1.0: usb_probe_interface - got id [82343.268081] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [82343.268591] usb 1-1.2: Detected FT232RL [82343.268628] usb 1-1.2: Number of endpoints 2 [82343.268661] usb 1-1.2: Endpoint 1 MaxPacketSize 64 [82343.268692] usb 1-1.2: Endpoint 2 MaxPacketSize 64 [82343.268722] usb 1-1.2: Setting MaxPacketSize 64 [82343.278546] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 [82343.280368] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82343.280501] hub 2-0:1.0: hub_suspend [82343.280601] usb usb2: bus auto-suspend, wakeup 1 [82355.101788] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82355.104431] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82355.214166] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82355.227865] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82355.294261] usb 1-1.1: new full-speed USB device number 15 using musb-hdrc [82355.308031] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82355.387888] usb 1-1.1: ep0 maxpacket = 8 [82355.390491] usb 1-1.1: default language 0x0409 [82355.394785] usb 1-1.1: udev 15, busnum 1, minor = 14 [82355.394832] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001 [82355.394868] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [82355.394901] usb 1-1.1: Product: TTL232R-3V3 [82355.394931] usb 1-1.1: Manufacturer: FTDI [82355.394961] usb 1-1.1: SerialNumber: FTGZJVHT [82355.399799] usb 1-1.1: usb_probe_device [82355.399855] usb 1-1.1: configuration #1 chosen from 1 choice [82355.400269] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [82355.403990] ftdi_sio 1-1.1:1.0: usb_probe_interface [82355.404041] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id [82355.404120] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [82355.404516] usb 1-1.1: Detected FT232RL [82355.404551] usb 1-1.1: Number of endpoints 2 [82355.404584] usb 1-1.1: Endpoint 1 MaxPacketSize 64 [82355.404615] usb 1-1.1: Endpoint 2 MaxPacketSize 64 [82355.404645] usb 1-1.1: Setting MaxPacketSize 64 [82355.411087] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB1 [82355.417748] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82356.381782] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82356.384761] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [82356.384819] usb 1-1.1: USB disconnect, device number 15 [82356.384854] usb 1-1.1: unregistering device [82356.384888] usb 1-1.1: unregistering interface 1-1.1:1.0 [82356.392828] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 [82356.393109] ftdi_sio 1-1.1:1.0: device disconnected [82356.393343] usb 1-1.1: usb_disable_device nuking all URBs [82356.511390] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82356.525039] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82356.591167] usb 1-1.1: new full-speed USB device number 16 using musb-hdrc [82356.606828] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82356.673391] usb 1-1.1: device descriptor read/64, error -32 [82356.803457] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82356.869010] usb 1-1.1: device descriptor read/64, error -32 [82356.994811] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82357.061369] usb 1-1.1: new full-speed USB device number 17 using musb-hdrc [82357.079931] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82357.145876] usb 1-1.1: device descriptor read/64, error -32 [82357.276115] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82357.341474] usb 1-1.1: device descriptor read/64, error -32 [82357.464283] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82357.530631] usb 1-1.1: new full-speed USB device number 18 using musb-hdrc [82357.936767] usb 1-1.1: device not accepting address 18, error -32 [82357.961672] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82358.028250] usb 1-1.1: new full-speed USB device number 19 using musb-hdrc [82358.436875] usb 1-1.1: device not accepting address 19, error -32 [82358.453426] hub 1-1:1.0: unable to enumerate USB device on port 1 [82358.469045] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82358.998147] usb usb2: usb auto-resume [82358.998176] hub 2-0:1.0: hub_resume [82358.999141] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82359.000225] hub 2-0:1.0: hub_suspend [82359.000609] usb usb2: bus auto-suspend, wakeup 1 [82359.000894] usb usb2: usb auto-resume [82359.000911] hub 2-0:1.0: hub_resume [82359.002295] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82359.002595] hub 2-0:1.0: hub_suspend [82359.002889] usb usb2: bus auto-suspend, wakeup 1 [82359.003736] usb usb2: usb auto-resume [82359.003757] hub 2-0:1.0: hub_resume [82359.004507] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82359.004766] hub 2-0:1.0: hub_suspend [82359.005007] usb usb2: bus auto-suspend, wakeup 1 [82359.005914] usb usb2: usb auto-resume [82359.005935] hub 2-0:1.0: hub_resume [82359.006667] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82359.006931] hub 2-0:1.0: hub_suspend [82359.007921] usb usb2: bus auto-suspend, wakeup 1 [82371.997855] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004 [82371.998395] hub 1-1:1.0: port 2, status 0100, change 0001, 12 Mb/s [82371.998445] usb 1-1.2: USB disconnect, device number 14 [82371.998479] usb 1-1.2: unregistering device [82371.998514] usb 1-1.2: unregistering interface 1-1.2:1.0 [82372.005820] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [82372.006094] ftdi_sio 1-1.2:1.0: device disconnected [82372.006331] usb 1-1.2: usb_disable_device nuking all URBs [82372.122892] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [82372.123036] hub 1-1:1.0: hub_suspend [82372.128165] usb 1-1: usb auto-suspend, wakeup 1 [82372.140434] hub 1-0:1.0: hub_suspend [82372.140821] usb usb1: bus auto-suspend, wakeup 1 [82372.140863] usb usb1: suspend raced with wakeup event [82372.140894] usb usb1: usb auto-resume [82372.140932] hub 1-0:1.0: hub_resume [82372.141276] hub 1-0:1.0: port 1: status 0507 change 0002 [82372.244203] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0002 [82372.244348] hub 1-0:1.0: port 1, status 0507, change 0000, 480 Mb/s [82372.245210] hub 1-0:1.0: hub_suspend [82372.245640] usb usb1: bus auto-suspend, wakeup 1 [82377.832859] usb usb1: usb auto-resume [82377.832890] hub 1-0:1.0: hub_resume [82377.833708] hub 1-0:1.0: port 1: status 0507 change 0000 [82377.833927] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82377.836116] usb 1-1: usb auto-resume [82377.863583] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [82377.887132] usb 1-1: finish resume [82377.888204] hub 1-1:1.0: hub_resume [82377.889374] hub 1-1:1.0: port 1: status 0101 change 0000 [82377.891887] hub 1-1:1.0: state 7 ports 4 chg 0002 evt 0000 [82377.892012] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [82377.904271] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82377.970627] usb 1-1.1: new full-speed USB device number 20 using musb-hdrc [82377.984444] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82378.050777] usb 1-1.1: device descriptor read/64, error -32 [82378.176071] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82378.246976] usb 1-1.1: device descriptor read/64, error -32 [82378.372607] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82378.438669] usb 1-1.1: new full-speed USB device number 21 using musb-hdrc [82378.455164] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82378.522096] usb 1-1.1: device descriptor read/64, error -32 [82378.651802] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82378.717344] usb 1-1.1: device descriptor read/64, error -32 [82378.843114] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82378.909502] usb 1-1.1: new full-speed USB device number 22 using musb-hdrc [82379.318310] usb 1-1.1: device not accepting address 22, error -32 [82379.343194] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82379.409685] usb 1-1.1: new full-speed USB device number 23 using musb-hdrc [82379.818346] usb 1-1.1: device not accepting address 23, error -32 [82379.828205] hub 1-1:1.0: unable to enumerate USB device on port 1 [82379.837358] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82379.848687] hub 1-1:1.0: hub_suspend [82379.855538] usb 1-1: usb auto-suspend, wakeup 1 [82379.869168] hub 1-0:1.0: hub_suspend [82379.869292] usb usb1: bus auto-suspend, wakeup 1 [82379.883595] usb usb2: usb auto-resume [82379.883654] hub 2-0:1.0: hub_resume [82379.887812] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82379.888443] hub 2-0:1.0: hub_suspend [82379.890454] usb usb2: bus auto-suspend, wakeup 1 [82379.891959] usb usb2: usb auto-resume [82379.892011] hub 2-0:1.0: hub_resume [82379.895365] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82379.895979] hub 2-0:1.0: hub_suspend [82379.897981] usb usb2: bus auto-suspend, wakeup 1 [82379.898647] usb usb2: usb auto-resume [82379.898693] hub 2-0:1.0: hub_resume [82379.900783] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82379.901494] hub 2-0:1.0: hub_suspend [82379.903593] usb usb2: bus auto-suspend, wakeup 1 [82379.904025] usb usb2: usb auto-resume [82379.904067] hub 2-0:1.0: hub_resume [82379.906378] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82379.906643] hub 2-0:1.0: hub_suspend [82379.906911] usb usb2: bus auto-suspend, wakeup 1 [82380.705202] usb usb1: usb auto-resume [82380.705232] hub 1-0:1.0: hub_resume [82380.705954] hub 1-0:1.0: port 1: status 0507 change 0000 [82380.706068] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [82380.708189] usb 1-1: usb auto-resume [82380.734889] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [82380.758339] usb 1-1: finish resume [82380.759399] hub 1-1:1.0: hub_resume [82380.760461] hub 1-1:1.0: port 1: status 0101 change 0000 [82380.762843] hub 1-1:1.0: state 7 ports 4 chg 0002 evt 0000 [82380.762982] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [82380.775395] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82380.841772] usb 1-1.1: new full-speed USB device number 24 using musb-hdrc [82380.855473] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82380.921841] usb 1-1.1: device descriptor read/64, error -32 [82381.104939] usb 1-1.1: device descriptor read/64, error -32 [82381.230004] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82381.296283] usb 1-1.1: new full-speed USB device number 25 using musb-hdrc [82381.315042] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82381.381380] usb 1-1.1: device descriptor read/64, error -32 [82381.511270] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82381.576307] usb 1-1.1: device descriptor read/64, error -32 [82381.702814] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82381.769538] usb 1-1.1: new full-speed USB device number 26 using musb-hdrc [82382.175812] usb 1-1.1: device not accepting address 26, error -32 [82382.200739] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82382.267071] usb 1-1.1: new full-speed USB device number 27 using musb-hdrc [82382.675838] usb 1-1.1: device not accepting address 27, error -32 [82382.685029] hub 1-1:1.0: unable to enumerate USB device on port 1 [82382.694360] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82382.707562] hub 1-1:1.0: hub_suspend [82382.715001] usb 1-1: usb auto-suspend, wakeup 1 [82382.728638] hub 1-0:1.0: hub_suspend [82382.728766] usb usb1: bus auto-suspend, wakeup 1 [82382.741977] usb usb2: usb auto-resume [82382.742034] hub 2-0:1.0: hub_resume [82382.746935] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82382.747673] hub 2-0:1.0: hub_suspend [82382.749624] usb usb2: bus auto-suspend, wakeup 1 [82382.751047] usb usb2: usb auto-resume [82382.751097] hub 2-0:1.0: hub_resume [82382.754571] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82382.755303] hub 2-0:1.0: hub_suspend [82382.757170] usb usb2: bus auto-suspend, wakeup 1 [82382.757659] usb usb2: usb auto-resume [82382.757705] hub 2-0:1.0: hub_resume [82382.761175] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82382.762000] hub 2-0:1.0: hub_suspend [82382.762814] usb usb2: bus auto-suspend, wakeup 1 [82382.763986] usb usb2: usb auto-resume [82382.764033] hub 2-0:1.0: hub_resume [82382.766130] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82382.766329] hub 2-0:1.0: hub_suspend [82382.769191] usb usb2: bus auto-suspend, wakeup 1 [82392.294790] usb usb1: usb wakeup-resume [82392.294890] usb usb1: usb auto-resume [82392.294938] hub 1-0:1.0: hub_resume [82392.296779] hub 1-0:1.0: port 1: status 0507 change 0004 [82392.296910] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0002 [82392.320713] usb 1-1: usb wakeup-resume [82392.320914] usb 1-1: finish resume [82392.321152] hub 1-1:1.0: hub_resume [82392.321301] hub 1-1:1.0: port 1: status 0101 change 0000 [82392.322454] hub 1-1:1.0: port 2: status 0101 change 0001 [82392.426304] hub 1-0:1.0: resume on port 1, status 0 [82392.426353] hub 1-0:1.0: port 1, status 0507, change 0004, 480 Mb/s [82392.426403] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [82392.426504] hub 1-1:1.0: state 7 ports 4 chg 0006 evt 0000 [82392.426671] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [82392.440032] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82392.454328] hub 1-1:1.0: unable to enumerate USB device on port 1 [82392.465863] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [82392.482441] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [82392.548425] usb 1-1.2: new full-speed USB device number 29 using musb-hdrc [82392.563039] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [82392.642973] usb 1-1.2: ep0 maxpacket = 8 [82392.646967] usb 1-1.2: default language 0x0409 [82392.652703] usb 1-1.2: udev 29, busnum 1, minor = 28 [82392.652752] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001 [82392.652788] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [82392.652821] usb 1-1.2: Product: FT232R USB UART [82392.652851] usb 1-1.2: Manufacturer: FTDI [82392.652881] usb 1-1.2: SerialNumber: AL008JIU [82392.658807] usb 1-1.2: usb_probe_device [82392.658863] usb 1-1.2: configuration #1 chosen from 1 choice [82392.659655] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [82392.663260] ftdi_sio 1-1.2:1.0: usb_probe_interface [82392.663314] ftdi_sio 1-1.2:1.0: usb_probe_interface - got id [82392.663550] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [82392.663952] usb 1-1.2: Detected FT232RL [82392.663987] usb 1-1.2: Number of endpoints 2 [82392.664020] usb 1-1.2: Endpoint 1 MaxPacketSize 64 [82392.664052] usb 1-1.2: Endpoint 2 MaxPacketSize 64 [82392.664081] usb 1-1.2: Setting MaxPacketSize 64 [82392.672650] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 [82392.682828] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82392.683846] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82392.795575] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82392.810369] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82392.825444] hub 1-1:1.0: unable to enumerate USB device on port 1 [82392.938819] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82392.942425] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82393.051346] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82393.065258] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82393.131398] usb 1-1.1: new full-speed USB device number 31 using musb-hdrc [82393.145093] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82393.211458] usb 1-1.1: device descriptor read/64, error -32 [82393.341800] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82393.407272] usb 1-1.1: device descriptor read/64, error -32 [82393.533048] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82393.599650] usb 1-1.1: new full-speed USB device number 32 using musb-hdrc [82393.618203] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82393.684584] usb 1-1.1: device descriptor read/64, error -32 [82393.814389] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82393.879841] usb 1-1.1: device descriptor read/64, error -32 [82394.005743] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82394.072269] usb 1-1.1: new full-speed USB device number 33 using musb-hdrc [82394.482858] usb 1-1.1: device not accepting address 33, error -32 [82394.507738] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82394.574251] usb 1-1.1: new full-speed USB device number 34 using musb-hdrc [82394.982866] usb 1-1.1: device not accepting address 34, error -32 [82394.992093] hub 1-1:1.0: unable to enumerate USB device on port 1 [82395.001168] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82401.642824] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82401.645072] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [82401.754736] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [82408.810825] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82408.815355] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82408.925163] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82408.938581] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.005245] usb 1-1.1: new full-speed USB device number 35 using musb-hdrc [82409.020937] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.086968] usb 1-1.1: device descriptor read/64, error -32 [82409.217165] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.282782] usb 1-1.1: device descriptor read/64, error -32 [82409.408557] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.475221] usb 1-1.1: new full-speed USB device number 36 using musb-hdrc [82409.491762] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.558148] usb 1-1.1: device descriptor read/64, error -32 [82409.687792] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.753381] usb 1-1.1: device descriptor read/64, error -32 [82409.879337] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82409.945706] usb 1-1.1: new full-speed USB device number 37 using musb-hdrc [82410.354461] usb 1-1.1: device not accepting address 37, error -32 [82410.379336] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82410.445776] usb 1-1.1: new full-speed USB device number 38 using musb-hdrc [82410.854498] usb 1-1.1: device not accepting address 38, error -32 [82410.864070] hub 1-1:1.0: unable to enumerate USB device on port 1 [82410.873327] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82417.258816] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82417.261664] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [82417.370532] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [82423.179127] usb usb2: usb auto-resume [82423.179156] hub 2-0:1.0: hub_resume [82423.180070] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82423.180347] hub 2-0:1.0: hub_suspend [82423.180587] usb usb2: bus auto-suspend, wakeup 1 [82423.180843] usb usb2: usb auto-resume [82423.180859] hub 2-0:1.0: hub_resume [82423.182677] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82423.183511] hub 2-0:1.0: hub_suspend [82423.183846] usb usb2: bus auto-suspend, wakeup 1 [82423.184172] usb usb2: usb auto-resume [82423.184189] hub 2-0:1.0: hub_resume [82423.184975] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82423.185828] hub 2-0:1.0: hub_suspend [82423.186181] usb usb2: bus auto-suspend, wakeup 1 [82423.186403] usb usb2: usb auto-resume [82423.186418] hub 2-0:1.0: hub_resume [82423.187791] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82423.188115] hub 2-0:1.0: hub_suspend [82423.188361] usb usb2: bus auto-suspend, wakeup 1 [82429.034933] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82429.036145] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82429.144274] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82429.157964] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82429.224419] usb 1-1.1: new full-speed USB device number 39 using musb-hdrc [82429.238030] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82429.304445] usb 1-1.1: device descriptor read/64, error -32 [82429.434688] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82429.500248] usb 1-1.1: device descriptor read/64, error -32 [82429.626117] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82429.692566] usb 1-1.1: new full-speed USB device number 40 using musb-hdrc [82429.711095] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82429.777505] usb 1-1.1: device descriptor read/64, error -32 [82429.906527] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82429.972829] usb 1-1.1: device descriptor read/64, error -32 [82430.098706] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82430.165494] usb 1-1.1: new full-speed USB device number 41 using musb-hdrc [82430.573947] usb 1-1.1: device not accepting address 41, error -32 [82430.653373] usb 1-1.1: new full-speed USB device number 42 using musb-hdrc [82431.062150] usb 1-1.1: device not accepting address 42, error -32 [82431.071541] hub 1-1:1.0: unable to enumerate USB device on port 1 [82431.080688] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82453.866827] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82453.867544] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [82453.981286] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [82471.786570] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82471.786846] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82471.895669] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82471.909326] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82471.975687] usb 1-1.1: new full-speed USB device number 43 using musb-hdrc [82471.989414] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82472.055789] usb 1-1.1: device descriptor read/64, error -32 [82472.185952] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82472.251555] usb 1-1.1: device descriptor read/64, error -32 [82472.377222] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82472.443943] usb 1-1.1: new full-speed USB device number 44 using musb-hdrc [82472.462524] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82472.528811] usb 1-1.1: device descriptor read/64, error -32 [82472.658654] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82472.724777] usb 1-1.1: device descriptor read/64, error -32 [82472.849924] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82472.915929] usb 1-1.1: new full-speed USB device number 45 using musb-hdrc [82473.325237] usb 1-1.1: device not accepting address 45, error -32 [82473.350099] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82473.416630] usb 1-1.1: new full-speed USB device number 46 using musb-hdrc [82473.825211] usb 1-1.1: device not accepting address 46, error -32 [82473.834401] hub 1-1:1.0: unable to enumerate USB device on port 1 [82473.843591] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82504.109780] usb usb2: usb auto-resume [82504.109809] hub 2-0:1.0: hub_resume [82504.109884] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82504.110097] hub 2-0:1.0: hub_suspend [82504.110125] usb usb2: bus auto-suspend, wakeup 1 [82504.110303] usb usb2: usb auto-resume [82504.110318] hub 2-0:1.0: hub_resume [82504.110366] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82504.110401] hub 2-0:1.0: hub_suspend [82504.110416] usb usb2: bus auto-suspend, wakeup 1 [82504.110577] usb usb2: usb auto-resume [82504.110589] hub 2-0:1.0: hub_resume [82504.110629] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82504.110663] hub 2-0:1.0: hub_suspend [82504.110678] usb usb2: bus auto-suspend, wakeup 1 [82504.110815] usb usb2: usb auto-resume [82504.110827] hub 2-0:1.0: hub_resume [82504.110862] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82504.110894] hub 2-0:1.0: hub_suspend [82504.110909] usb usb2: bus auto-suspend, wakeup 1 [82514.139966] usb usb2: usb auto-resume [82514.139995] hub 2-0:1.0: hub_resume [82514.140070] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82514.140287] hub 2-0:1.0: hub_suspend [82514.140315] usb usb2: bus auto-suspend, wakeup 1 [82514.140492] usb usb2: usb auto-resume [82514.140504] hub 2-0:1.0: hub_resume [82514.140550] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82514.140587] hub 2-0:1.0: hub_suspend [82514.140603] usb usb2: bus auto-suspend, wakeup 1 [82514.140761] usb usb2: usb auto-resume [82514.140774] hub 2-0:1.0: hub_resume [82514.140814] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82514.141952] hub 2-0:1.0: hub_suspend [82514.141983] usb usb2: bus auto-suspend, wakeup 1 [82514.142204] usb usb2: usb auto-resume [82514.142218] hub 2-0:1.0: hub_resume [82514.142275] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82514.142322] hub 2-0:1.0: hub_suspend [82514.142338] usb usb2: bus auto-suspend, wakeup 1 [82523.242499] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82523.246734] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [82523.356183] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [82575.722485] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82575.722722] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [82575.830541] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [82575.844254] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82575.910659] usb 1-1.1: new full-speed USB device number 47 using musb-hdrc [82575.924323] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [82576.004291] usb 1-1.1: ep0 maxpacket = 8 [82576.006056] usb 1-1.1: default language 0x0409 [82576.010188] usb 1-1.1: udev 47, busnum 1, minor = 46 [82576.010233] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001 [82576.010270] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [82576.010302] usb 1-1.1: Product: TTL232R-3V3 [82576.010332] usb 1-1.1: Manufacturer: FTDI [82576.010362] usb 1-1.1: SerialNumber: FTGZJVHT [82576.014302] usb 1-1.1: usb_probe_device [82576.014355] usb 1-1.1: configuration #1 chosen from 1 choice [82576.016105] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [82576.018600] ftdi_sio 1-1.1:1.0: usb_probe_interface [82576.018649] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id [82576.018725] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [82576.019121] usb 1-1.1: Detected FT232RL [82576.019156] usb 1-1.1: Number of endpoints 2 [82576.019188] usb 1-1.1: Endpoint 1 MaxPacketSize 64 [82576.019219] usb 1-1.1: Endpoint 2 MaxPacketSize 64 [82576.019249] usb 1-1.1: Setting MaxPacketSize 64 [82576.020292] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB1 [82576.024190] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [82745.677277] usb usb2: usb auto-resume [82745.677306] hub 2-0:1.0: hub_resume [82745.677381] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82745.681614] hub 2-0:1.0: hub_suspend [82745.681652] usb usb2: bus auto-suspend, wakeup 1 [82745.681892] usb usb2: usb auto-resume [82745.681909] hub 2-0:1.0: hub_resume [82745.681976] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82745.682024] hub 2-0:1.0: hub_suspend [82745.682041] usb usb2: bus auto-suspend, wakeup 1 [82745.682217] usb usb2: usb auto-resume [82745.682230] hub 2-0:1.0: hub_resume [82745.682273] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82745.682309] hub 2-0:1.0: hub_suspend [82745.682325] usb usb2: bus auto-suspend, wakeup 1 [82745.682469] usb usb2: usb auto-resume [82745.682481] hub 2-0:1.0: hub_resume [82745.682518] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [82745.683547] hub 2-0:1.0: hub_suspend [82745.683573] usb usb2: bus auto-suspend, wakeup 1 [83871.338513] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [83871.338766] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [83871.338818] usb 1-1.1: USB disconnect, device number 47 [83871.338852] usb 1-1.1: unregistering device [83871.338886] usb 1-1.1: unregistering interface 1-1.1:1.0 [83871.348559] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 [83871.348841] ftdi_sio 1-1.1:1.0: device disconnected [83871.349079] usb 1-1.1: usb_disable_device nuking all URBs [83871.462947] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [83871.476650] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83871.543034] usb 1-1.1: new full-speed USB device number 48 using musb-hdrc [83871.556693] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83871.623060] usb 1-1.1: device descriptor read/64, error -32 [83871.746133] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83871.813010] usb 1-1.1: device descriptor read/64, error -32 [83871.935779] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83872.002022] usb 1-1.1: new full-speed USB device number 49 using musb-hdrc [83872.015702] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83872.082075] usb 1-1.1: device descriptor read/64, error -32 [83872.205146] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83872.271565] usb 1-1.1: device descriptor read/64, error -32 [83872.394641] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83872.461020] usb 1-1.1: new full-speed USB device number 50 using musb-hdrc [83872.867181] usb 1-1.1: device not accepting address 50, error -32 [83872.886900] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [83872.953222] usb 1-1.1: new full-speed USB device number 51 using musb-hdrc [83873.359473] usb 1-1.1: device not accepting address 51, error -32 [83873.366844] hub 1-1:1.0: unable to enumerate USB device on port 1 [83873.374179] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [91373.674509] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [91373.674763] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [91373.783900] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [91373.797651] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91373.863961] usb 1-1.1: new full-speed USB device number 52 using musb-hdrc [91373.877661] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91373.944029] usb 1-1.1: device descriptor read/64, error -32 [91374.067130] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91374.133518] usb 1-1.1: device descriptor read/64, error -32 [91374.256549] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91374.322951] usb 1-1.1: new full-speed USB device number 53 using musb-hdrc [91374.336641] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91374.403016] usb 1-1.1: device descriptor read/64, error -32 [91374.526081] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91374.592562] usb 1-1.1: device descriptor read/64, error -32 [91374.715548] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91374.781940] usb 1-1.1: new full-speed USB device number 54 using musb-hdrc [91375.188115] usb 1-1.1: device not accepting address 54, error -32 [91375.207790] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [91375.274131] usb 1-1.1: new full-speed USB device number 55 using musb-hdrc [91375.680321] usb 1-1.1: device not accepting address 55, error -32 [91375.687590] hub 1-1:1.0: unable to enumerate USB device on port 1 [91375.694864] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [93724.778497] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [93724.778774] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [93724.887038] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [93724.900723] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93724.967068] usb 1-1.1: new full-speed USB device number 56 using musb-hdrc [93724.980762] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93725.047119] usb 1-1.1: device descriptor read/64, error -32 [93725.170281] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93725.236641] usb 1-1.1: device descriptor read/64, error -32 [93725.359680] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93725.426091] usb 1-1.1: new full-speed USB device number 57 using musb-hdrc [93725.439765] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93725.506202] usb 1-1.1: device descriptor read/64, error -32 [93725.629211] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93725.695596] usb 1-1.1: device descriptor read/64, error -32 [93725.818695] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93725.885084] usb 1-1.1: new full-speed USB device number 58 using musb-hdrc [93726.291256] usb 1-1.1: device not accepting address 58, error -32 [93726.310926] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [93726.377340] usb 1-1.1: new full-speed USB device number 59 using musb-hdrc [93726.783450] usb 1-1.1: device not accepting address 59, error -32 [93726.791964] hub 1-1:1.0: unable to enumerate USB device on port 1 [93726.799204] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [270280.810508] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [270280.810758] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [270280.918855] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [270280.932552] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270280.998951] usb 1-1.1: new full-speed USB device number 60 using musb-hdrc [270281.012665] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270281.079020] usb 1-1.1: device descriptor read/64, error -32 [270281.202103] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270281.268487] usb 1-1.1: device descriptor read/64, error -32 [270281.391554] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270281.458061] usb 1-1.1: new full-speed USB device number 61 using musb-hdrc [270281.471677] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270281.538073] usb 1-1.1: device descriptor read/64, error -32 [270281.661147] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270281.727480] usb 1-1.1: device descriptor read/64, error -32 [270281.850609] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270281.916943] usb 1-1.1: new full-speed USB device number 62 using musb-hdrc [270282.323156] usb 1-1.1: device not accepting address 62, error -32 [270282.342808] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [270282.409182] usb 1-1.1: new full-speed USB device number 63 using musb-hdrc [270282.815361] usb 1-1.1: device not accepting address 63, error -32 [270282.822830] hub 1-1:1.0: unable to enumerate USB device on port 1 [270282.830331] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [323479.402587] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [323479.402849] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [323479.512553] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [323479.526291] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323479.592633] usb 1-1.1: new full-speed USB device number 64 using musb-hdrc [323479.606319] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323479.672670] usb 1-1.1: device descriptor read/64, error -32 [323479.795740] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323479.862178] usb 1-1.1: device descriptor read/64, error -32 [323479.985191] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323480.051592] usb 1-1.1: new full-speed USB device number 65 using musb-hdrc [323480.065305] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323480.131640] usb 1-1.1: device descriptor read/64, error -32 [323480.254730] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323480.321147] usb 1-1.1: device descriptor read/64, error -32 [323480.444232] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323480.510611] usb 1-1.1: new full-speed USB device number 66 using musb-hdrc [323480.916849] usb 1-1.1: device not accepting address 66, error -32 [323480.936440] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [323481.002791] usb 1-1.1: new full-speed USB device number 67 using musb-hdrc [323481.409001] usb 1-1.1: device not accepting address 67, error -32 [323481.416580] hub 1-1:1.0: unable to enumerate USB device on port 1 [323481.424070] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326583.914538] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326583.914780] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326584.022576] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326584.036337] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326584.102630] usb 1-1.1: new full-speed USB device number 68 using musb-hdrc [326584.116341] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326584.182725] usb 1-1.1: device descriptor read/64, error -32 [326584.305797] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326584.372228] usb 1-1.1: device descriptor read/64, error -32 [326584.495327] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326584.561670] usb 1-1.1: new full-speed USB device number 69 using musb-hdrc [326584.575352] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326584.641839] usb 1-1.1: device descriptor read/64, error -32 [326584.764800] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326584.831189] usb 1-1.1: device descriptor read/64, error -32 [326584.954337] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326585.020691] usb 1-1.1: new full-speed USB device number 70 using musb-hdrc [326585.426873] usb 1-1.1: device not accepting address 70, error -32 [326585.448443] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326585.462299] hub 1-1:1.0: unable to enumerate USB device on port 1 [326585.469810] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326585.470015] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326585.579317] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326585.592985] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326585.659353] usb 1-1.1: new full-speed USB device number 72 using musb-hdrc [326585.673045] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326585.739413] usb 1-1.1: device descriptor read/64, error -32 [326585.862697] hub 1-1:1.0: unable to enumerate USB device on port 1 [326585.870420] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326585.870675] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326585.979722] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326585.993455] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.059773] usb 1-1.1: new full-speed USB device number 73 using musb-hdrc [326586.073454] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.139849] usb 1-1.1: device descriptor read/64, error -32 [326586.262950] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.329313] usb 1-1.1: device descriptor read/64, error -32 [326586.452361] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.518748] usb 1-1.1: new full-speed USB device number 74 using musb-hdrc [326586.532481] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.598958] usb 1-1.1: device descriptor read/64, error -32 [326586.721929] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.788287] usb 1-1.1: device descriptor read/64, error -32 [326586.911457] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326586.977820] usb 1-1.1: new full-speed USB device number 75 using musb-hdrc [326587.384046] usb 1-1.1: device not accepting address 75, error -32 [326587.405554] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326587.419373] hub 1-1:1.0: unable to enumerate USB device on port 1 [326587.426714] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326587.427689] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326587.536436] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326587.550171] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326587.616513] usb 1-1.1: new full-speed USB device number 77 using musb-hdrc [326587.630176] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326587.696686] usb 1-1.1: device descriptor read/64, error -32 [326587.819621] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326587.886068] usb 1-1.1: device descriptor read/64, error -32 [326588.009194] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.075455] usb 1-1.1: new full-speed USB device number 78 using musb-hdrc [326588.089176] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.155570] usb 1-1.1: device descriptor read/64, error -32 [326588.278612] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.292456] hub 1-1:1.0: unable to enumerate USB device on port 1 [326588.299796] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326588.300822] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326588.409461] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326588.423200] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.489611] usb 1-1.1: new full-speed USB device number 79 using musb-hdrc [326588.503254] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.569612] usb 1-1.1: device descriptor read/64, error -32 [326588.692887] hub 1-1:1.0: unable to enumerate USB device on port 1 [326588.700392] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326588.700580] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326588.809876] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326588.823572] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.889936] usb 1-1.1: new full-speed USB device number 80 using musb-hdrc [326588.903678] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326588.970038] usb 1-1.1: device descriptor read/64, error -32 [326589.093253] hub 1-1:1.0: unable to enumerate USB device on port 1 [326589.290533] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326589.290810] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326589.399861] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326589.413479] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326589.479825] usb 1-1.1: new full-speed USB device number 81 using musb-hdrc [326589.494029] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326589.559905] usb 1-1.1: device descriptor read/64, error -32 [326589.683004] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326589.749372] usb 1-1.1: device descriptor read/64, error -32 [326589.873159] hub 1-1:1.0: unable to enumerate USB device on port 1 [326589.880868] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326589.881175] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326589.989663] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326590.003326] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.069711] usb 1-1.1: new full-speed USB device number 83 using musb-hdrc [326590.083469] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.149825] usb 1-1.1: device descriptor read/64, error -32 [326590.272850] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.339243] usb 1-1.1: device descriptor read/64, error -32 [326590.462312] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.528699] usb 1-1.1: new full-speed USB device number 84 using musb-hdrc [326590.542418] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.608805] usb 1-1.1: device descriptor read/64, error -32 [326590.731853] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.798302] usb 1-1.1: device descriptor read/64, error -32 [326590.921315] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326590.987703] usb 1-1.1: new full-speed USB device number 85 using musb-hdrc [326591.393910] usb 1-1.1: device not accepting address 85, error -32 [326591.415477] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326591.429314] hub 1-1:1.0: unable to enumerate USB device on port 1 [326591.436742] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326591.437747] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326591.546361] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326591.560054] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326591.626418] usb 1-1.1: new full-speed USB device number 87 using musb-hdrc [326591.640169] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326591.706491] usb 1-1.1: device descriptor read/64, error -32 [326591.829698] hub 1-1:1.0: unable to enumerate USB device on port 1 [326591.837066] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326591.838056] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326591.946745] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326591.960462] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326592.026818] usb 1-1.1: new full-speed USB device number 88 using musb-hdrc [326592.040578] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326592.106916] usb 1-1.1: device descriptor read/64, error -32 [326592.229969] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326592.296428] usb 1-1.1: device descriptor read/64, error -32 [326592.419571] hub 1-1:1.0: unable to enumerate USB device on port 1 [326592.427003] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326592.428055] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326592.536693] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326592.550304] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326592.616671] usb 1-1.1: new full-speed USB device number 90 using musb-hdrc [326592.630387] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326592.696805] usb 1-1.1: device descriptor read/64, error -32 [326592.820015] hub 1-1:1.0: unable to enumerate USB device on port 1 [326592.874475] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326592.874770] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326592.983931] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326592.997598] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.063947] usb 1-1.1: new full-speed USB device number 91 using musb-hdrc [326593.077677] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.144053] usb 1-1.1: device descriptor read/64, error -32 [326593.267123] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.333523] usb 1-1.1: device descriptor read/64, error -32 [326593.456588] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.470428] hub 1-1:1.0: unable to enumerate USB device on port 1 [326593.477953] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326593.478162] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326593.587462] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326593.601178] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.667560] usb 1-1.1: new full-speed USB device number 93 using musb-hdrc [326593.681214] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.747586] usb 1-1.1: device descriptor read/64, error -32 [326593.870708] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326593.937070] usb 1-1.1: device descriptor read/64, error -32 [326594.060123] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326594.126553] usb 1-1.1: new full-speed USB device number 94 using musb-hdrc [326594.140235] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326594.206719] usb 1-1.1: device descriptor read/64, error -32 [326594.329884] hub 1-1:1.0: unable to enumerate USB device on port 1 [326594.337456] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326594.337665] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326594.446934] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326594.460559] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326594.526915] usb 1-1.1: new full-speed USB device number 95 using musb-hdrc [326594.540683] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326594.607066] usb 1-1.1: device descriptor read/64, error -32 [326594.730078] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326594.796470] usb 1-1.1: device descriptor read/64, error -32 [326594.919572] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326594.985908] usb 1-1.1: new full-speed USB device number 96 using musb-hdrc [326594.999687] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326595.065986] usb 1-1.1: device descriptor read/64, error -32 [326595.189084] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326595.255565] usb 1-1.1: device descriptor read/64, error -32 [326595.378542] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326595.444952] usb 1-1.1: new full-speed USB device number 97 using musb-hdrc [326595.851180] usb 1-1.1: device not accepting address 97, error -32 [326595.872702] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326595.886537] hub 1-1:1.0: unable to enumerate USB device on port 1 [326595.894627] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326595.894906] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326596.003551] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326596.017287] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326596.083676] usb 1-1.1: new full-speed USB device number 99 using musb-hdrc [326596.097362] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326596.163713] usb 1-1.1: device descriptor read/64, error -32 [326596.286821] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326596.353183] usb 1-1.1: device descriptor read/64, error -32 [326596.476247] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326596.542663] usb 1-1.1: new full-speed USB device number 100 using musb-hdrc [326596.556351] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326596.622790] usb 1-1.1: device descriptor read/64, error -32 [326596.746008] hub 1-1:1.0: unable to enumerate USB device on port 1 [326596.970491] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [326596.970739] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [326597.079824] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [326597.093473] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326597.159840] usb 1-1.1: new full-speed USB device number 101 using musb-hdrc [326597.173568] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326597.239936] usb 1-1.1: device descriptor read/64, error -32 [326597.362994] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326597.429396] usb 1-1.1: device descriptor read/64, error -32 [326597.552478] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326597.618935] usb 1-1.1: new full-speed USB device number 102 using musb-hdrc [326597.632601] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326597.698951] usb 1-1.1: device descriptor read/64, error -32 [326597.822041] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326597.888436] usb 1-1.1: device descriptor read/64, error -32 [326598.011476] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326598.077840] usb 1-1.1: new full-speed USB device number 103 using musb-hdrc [326598.484093] usb 1-1.1: device not accepting address 103, error -32 [326598.505655] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [326598.572049] usb 1-1.1: new full-speed USB device number 104 using musb-hdrc [326598.978217] usb 1-1.1: device not accepting address 104, error -32 [326598.985859] hub 1-1:1.0: unable to enumerate USB device on port 1 [326598.993238] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [328725.866535] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [328725.866794] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [328725.976432] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [328725.990175] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.003971] hub 1-1:1.0: unable to enumerate USB device on port 1 [328726.122500] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [328726.123689] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [328726.232324] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [328726.246016] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.312386] usb 1-1.1: new full-speed USB device number 106 using musb-hdrc [328726.326100] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.392462] usb 1-1.1: device descriptor read/64, error -32 [328726.515560] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.529426] hub 1-1:1.0: unable to enumerate USB device on port 1 [328726.536885] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [328726.537153] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [328726.646367] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [328726.660058] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.726434] usb 1-1.1: new full-speed USB device number 107 using musb-hdrc [328726.740201] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.806544] usb 1-1.1: device descriptor read/64, error -32 [328726.929616] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328726.996006] usb 1-1.1: device descriptor read/64, error -32 [328727.119069] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328727.185460] usb 1-1.1: new full-speed USB device number 108 using musb-hdrc [328727.199174] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328727.265541] usb 1-1.1: device descriptor read/64, error -32 [328727.388602] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328727.454995] usb 1-1.1: device descriptor read/64, error -32 [328727.578078] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328727.644474] usb 1-1.1: new full-speed USB device number 109 using musb-hdrc [328728.050774] usb 1-1.1: device not accepting address 109, error -32 [328728.072303] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [328728.138684] usb 1-1.1: new full-speed USB device number 110 using musb-hdrc [328728.544839] usb 1-1.1: device not accepting address 110, error -32 [328728.552613] hub 1-1:1.0: unable to enumerate USB device on port 1 [328728.560010] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [331967.338531] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [331967.338790] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [331967.528741] hub 1-1:1.0: debounce: port 1: total 175ms stable 100ms status 0x101 [331967.542454] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331967.608785] usb 1-1.1: new full-speed USB device number 111 using musb-hdrc [331967.622575] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331967.688907] usb 1-1.1: device descriptor read/64, error -32 [331967.811959] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331967.878345] usb 1-1.1: device descriptor read/64, error -32 [331968.001543] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331968.067886] usb 1-1.1: new full-speed USB device number 112 using musb-hdrc [331968.081540] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331968.147918] usb 1-1.1: device descriptor read/64, error -32 [331968.270976] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331968.337398] usb 1-1.1: device descriptor read/64, error -32 [331968.460432] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331968.526825] usb 1-1.1: new full-speed USB device number 113 using musb-hdrc [331968.933039] usb 1-1.1: device not accepting address 113, error -32 [331968.954694] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [331969.021016] usb 1-1.1: new full-speed USB device number 114 using musb-hdrc [331969.427203] usb 1-1.1: device not accepting address 114, error -32 [331969.434780] hub 1-1:1.0: unable to enumerate USB device on port 1 [331969.442138] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [333038.442527] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [333038.442813] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s [333038.551210] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [333038.954510] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 [333038.954721] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [333039.062953] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [333039.076698] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [333039.143024] usb 1-1.1: new full-speed USB device number 115 using musb-hdrc [333039.156767] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [333039.236688] usb 1-1.1: ep0 maxpacket = 8 [333039.238363] usb 1-1.1: default language 0x0409 [333039.242515] usb 1-1.1: udev 115, busnum 1, minor = 114 [333039.242560] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001 [333039.242596] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [333039.242628] usb 1-1.1: Product: TTL232R-3V3 [333039.242659] usb 1-1.1: Manufacturer: FTDI [333039.242689] usb 1-1.1: SerialNumber: FTGZJVHT [333039.246708] usb 1-1.1: usb_probe_device [333039.246763] usb 1-1.1: configuration #1 chosen from 1 choice [333039.247072] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [333039.249523] ftdi_sio 1-1.1:1.0: usb_probe_interface [333039.249571] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id [333039.249648] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [333039.250030] usb 1-1.1: Detected FT232RL [333039.250064] usb 1-1.1: Number of endpoints 2 [333039.250098] usb 1-1.1: Endpoint 1 MaxPacketSize 64 [333039.250130] usb 1-1.1: Endpoint 2 MaxPacketSize 64 [333039.250160] usb 1-1.1: Setting MaxPacketSize 64 [333039.251795] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB1 [333039.256627] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002