Good to know Maxim, thanks for letting us (me) know. Never had, or used one . . .
On Thu, Oct 15, 2015 at 11:45 AM, Maxim Podbereznyy <lisar...@gmail.com> wrote: > Imx6 plus is going to have M4 on die > 15 Окт 2015 г. 19:38 пользователь "William Hermans" <yyrk...@gmail.com> > написал: > > *I presume DSPs and microcontrollers on die are a selling point for Sitara >>> AM57xx. I'm curious if anyone knows if there are other suppliers that >>> offer ARM Cortex A series processor with microcontroller core(s) on die?* >>> >> >> IPU is a generic enough term one would think so, but I've never seen one >> yet. PRU< definately not, that is unique to TI. >> >> On Thu, Oct 15, 2015 at 8:29 AM, Drew Fustini <pdp7p...@gmail.com> wrote: >> >>> I do like my Novena open hardware laptop with iMX6 :) >>> >>> I presume DSPs and microcontrollers on die are a selling point for >>> Sitara AM57xx. I'm curious if anyone knows if there are other suppliers >>> that offer ARM Cortex A series processor with microcontroller core(s) on >>> die? >>> >>> Thanks >>> Drew >>> On Oct 15, 2015 1:35 AM, "Maxim Podbereznyy" <lisar...@gmail.com> wrote: >>> >>>> AM5728 for $75 @1k??? Ridiculously high price. I think imx6q is a >>>> better deal and the Plus version is on the way >>>> >>>> 2015-10-15 7:07 GMT+03:00 William Hermans <yyrk...@gmail.com>: >>>> >>>>> Also. . . >>>>> >>>>> *IVA support only for IPU2 is kind of a bummer . . .But I'm wondering >>>>>> if the GPU could be used for GPGPU processing since it seems to sit on >>>>>> the >>>>>> L3 interconnect as well.* >>>>>> >>>>> >>>>> I was under the impression, and quite incorrectly that each IPU >>>>> mentioned in the TRM was a single processor. When in fact each IPU is a >>>>> subsystem with 2 M4 cores, not singles. Which is good news after all. >>>>> >>>>> And dahm, this newer processor sure is getting complex. Seeing mention >>>>> in the TRM to read other documents in relation to the various different >>>>> cores. Like you eluded to above Robert. heh. Read the C6000 TRM, M4 TRM, >>>>> plus what else ? On top of the 7483 pages already in the AM572x TRM . . >>>>> .heh lots of reading to do . . . >>>>> >>>>> On Wed, Oct 14, 2015 at 8:58 PM, William Hermans <yyrk...@gmail.com> >>>>> wrote: >>>>> >>>>>> Robert, >>>>>> >>>>>> I'm curious, have you played at all with remoteproc / RPMsg at all ? >>>>>> Seems very interesting, but also complex in setup. Also, not so sure if >>>>>> anything other than TI-RTOS is supported on the various beagle products. >>>>>> But was more interested in something else, perhaps even bare metal. >>>>>> >>>>>> On Wed, Oct 14, 2015 at 8:19 PM, Robert Nelson < >>>>>> robertcnel...@gmail.com> wrote: >>>>>> >>>>>>> On Wed, Oct 14, 2015 at 10:01 PM, William Hermans <yyrk...@gmail.com> >>>>>>> wrote: >>>>>>> >> 7.1.1 Introduction >>>>>>> >> The device instantiates two dual Cortex™-M4 image processor unit >>>>>>> (IPU) >>>>>>> >> subsystems: >>>>>>> >> • IPU1 subsystem is available for general purpose usage >>>>>>> >> • IPU2 subsystem is dedicated to IVA support and is not available >>>>>>> for >>>>>>> >> other processing >>>>>>> > >>>>>>> > >>>>>>> > IVA support only for IPU2 is kind of a bummer . . .But I'm >>>>>>> wondering if the >>>>>>> > GPU could be used for GPGPU processing since it seems to sit on >>>>>>> the L3 >>>>>>> > interconnect as well. >>>>>>> >>>>>>> Well there's opencl from ti for the dual c6000's.. ;) >>>>>>> >>>>>>> http://git.ti.com/gitweb/?p=opencl/ti-opencl.git;a=summary >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> -- >>>>>>> Robert Nelson >>>>>>> https://rcn-ee.com/ >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to beagleboard+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> >>>> >>>> -- >>>> LinkedIn - http://www.linkedin.com/in/maximpodbereznyy >>>> Company - http://www.linkedin.com/company/mentorel >>>> Facebook - https://www.facebook.com/mentorel.company >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
