Tried to post this yesterday but it looks like the forum ate it, so trying again. Apologies if the original shows up later...
I'm trying to get HDMI audio and video working from my BeagleBone Black to my television. The video part seems to work just fine. I know the audio can work over HDMI with this specific cable and this specific television as I am already using it with the HTPC system that I'd like the BeagleBone to replace. I've already tried adding lines to /boot/uEnv.txt to force the resolution. The video resolution changes, but no luck with audio. I tried both 1920x1080@24 and1280x720@60 (separately) based on http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI I'm running the 2015-03-01 Debian image from http://beagleboard.org/latest-images Running "fbset" produces: debian@beaglebone:~$ fbset mode "1920x1080" geometry 1920 1080 1920 1080 16 timings 0 0 0 0 0 0 0 accel true rgba 5/11,6/5,5/0,0/0 endmode which I notice has no EDID information, but I'm not sure what I can/should do about that. Google searches seems split into two camps: either it is completely impossible without rewriting every line of the kernel... or it is trivially easy but they don't bother to mention HOW they got it working... Any ideas? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.